Datasheet Details
| Part number | TS4871 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 1.45 MB |
| Description | OUTPUT RAIL TO RAIL 1W AUDIO POWER AMPLIFIER WITH STANDBY MODE |
| Datasheet |
 TS4871 Datasheet
|
|
|
| Part number | TS4871 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 1.45 MB |
| Description | OUTPUT RAIL TO RAIL 1W AUDIO POWER AMPLIFIER WITH STANDBY MODE |
| Datasheet |
TS4871 Datasheet
|
|
|
|
TS4871ID-TS4871IDT - SO8 Standby 1 2 3 4 8 7 6 5 VOUT2 GND VCC VOUT1 The TS4871 is an Audio Power Amplifier capable of delivering 1W of continuous RMS Ouput Power into 8Ω load @ 5V.
This Audio Amplifier is exhibiting 0.1% distortion level (THD) from a 5V supply for a Pout = 250mW RMS.
An external standby mode control reduces the supply current to less than 10nA.
TS4871 OUTPUT RAIL TO RAIL 1W AUDIO POWER AMPLIFIER WITH STANDBY MODE s OPERATING FROM VCC = 2.5V to 5.5V s 1W RAIL TO RAIL OUTPUT POWER @ Vcc=5V, THD=1%, f=1kHz, with 8Ω Load MODE (10nA) PIN CONNECTIONS (Top View) TS4871IST - MiniSO8 1 2 3 4 8 7 6 5 s ULTRA LOW CONSUMPTION IN STANDBY Standby Bypass VIN+ VINVOUT2 GND VCC VOUT1 s 75dB PSRR @ 217Hz from 5V to 2.6V s ULTRA LOW POP & CLICK s ULTRA LOW DISTORTION (0.
| Part Number | Description |
|---|---|
| TS487 | 100mW STEREO HEADPHONE AMPLIFIER WITH STANDBY MODE |
| TS4872 | 1W AUDIO POWER AMPLIFIER |
| TS482 | 100mW STEREO HEADPHONE AMPLIFIER |
| TS4851 | MONO 1W SPEAKER AND STEREO 160 mW HEADSET BTL DRIVERS |
| TS4855 | LOUDSPEAKER & HEADSET DRIVER |
| TS486 | 100mW STEREO HEADPHONE AMPLIFIER WITH STANDBY MODE |
| TS488 | Pop-free 120 mW stereo headphone amplifier |
| TS489 | Pop-free 120 mW stereo headphone amplifier |
| TS4890 | RAIL TO RAIL OUTPUT 1W AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW |
| TS4040 | 2.5V micropower shunt voltage reference |