Datasheet4U Logo Datasheet4U.com

STUSBCD01B - USB charger detection interface

Description

The STUSBCD01B is a USB charger detection IC which can detect dedicated USB chargers, Host/Hub chargers or standard host ports connected to the USB DP/DM data lines.

Features

  • Capable of detecting dedicated USB chargers and host chargers (current sink and dedicated methods) Operates with VBAT supply voltage ranging from 2.2 V to 4.5 V Active high open drain hardware detection pin (DETECT) GPIO control interface 1.6 V - 2.8 V interface voltage range (VIO) VBUS voltage 6 V clamping circuit Low DP-DM input capacitance ESD: HBM ± 2 kV, CDM 500 V on every pin 12 bumps Flip-Chip package, 1.6 x1.2 mm, pitch 0.4 mm, max thickness 0.60 mm, Halogen free RoHS compliant pa.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STUS010 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR EIC
STUS011 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR EIC
STUS012 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR EIC
STUS013 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR EIC
STUS014 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR EIC

Other Datasheets by STMicroelectronics

Part Number Description
STUSB02E USB Transceiver
STUSB03E USB Transceiver
STUSB06E 3.3 V USB transceiver
STUSB1600 USB Type-C controller
STUSB1602 USB Type-C controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STUSBCD01B USB charger detection interface Features ■ Capable of detecting dedicated USB chargers and host chargers (current sink and dedicated methods) Operates with VBAT supply voltage ranging from 2.2 V to 4.5 V Active high open drain hardware detection pin (DETECT) GPIO control interface 1.6 V - 2.8 V interface voltage range (VIO) VBUS voltage 6 V clamping circuit Low DP-DM input capacitance ESD: HBM ± 2 kV, CDM 500 V on every pin 12 bumps Flip-Chip package, 1.6 x1.2 mm, pitch 0.4 mm, max thickness 0.60 mm, Halogen free RoHS compliant package Operation is controlled through three general purpose I/O pins; a hardware open drain detection output is also available. An internal regulator provides the 1.
Published: |