Datasheet4U Logo Datasheet4U.com

STPAC02F2 - RF Detector for power amplifier control

General Description

The STPAC02F2 is an integrated RF detector for power control chain.

It has been developed to convert the RF signal coming from the external coupler into a DC signal usable by the mobile digital stage.

Key Features

  • set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STPAC02F1 RF DETECTOR FOR POWER AMPLIFIER CONTROL WITH INTERNAL TEMPERATURE COMPENSATION IPADTM ST Microelectronics
STPAC01F1 RF DETECTOR FOR POWER AMPLIFIER CONTROL ST Microelectronics
STPAC01F2 RF Detector ST Microelectronics
STPA150 (STPA62 - STPA270) SOLID STATE TELECOMMUNICATION PROTECTION ARRESTOR CHONGQING PINGYANG ELECTRONICS
STPA180 (STPA62 - STPA270) SOLID STATE TELECOMMUNICATION PROTECTION ARRESTOR CHONGQING PINGYANG ELECTRONICS

Other Datasheets by STMicroelectronics

Part Number Description
STPA001 4 x 50 W MOSFET quad bridge power amplifier
STPA002 4 x 52 W quad bridge power amplifier
STPA003 4 x 52 W quad bridge power amplifier
STPA008 4 x 50W MOSFET quad bridge power amplifier
STPA008ZS 4 x 50W MOSFET quad bridge power amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com STPAC02F2 IPAD™ RF Detector for power amplifier control with internal temperature compensation Main product characteristics ■ ■ ■ ■ ■ ■ ■ ■ 0.8 to 2.5 GHz frequency range Detection diode voltage drop compensation Temperature compensation Fast response time Low Power consumption Chip Scale device Low parasitic impedance Lead free package Flip-Chip package (8 Bumps) Description The STPAC02F2 is an integrated RF detector for power control chain. It has been developed to convert the RF signal coming from the external coupler into a DC signal usable by the mobile digital stage. It is based on the use of two similar diodes, one assuming the signal detection while the second one is used to compensate the ambient temperature effect.