Datasheet4U Logo Datasheet4U.com

STOD1812 - Power supply

General Description

STOD1812 is a step-up converter designed to power passive matrix OLED (PMOLED) displays, providing the pre-charge and biasing voltage of the column matrix driver.

STOD1812 uses a pulsed frequency modulation (PFM) control mode technique.

Key Features

  • Synchronous step-up converter.
  • Input voltage range from 2.5 V to 5.5 V.
  • Maximum output current 120 mA.
  • Efficiency: 75 % at IO = 10 mA - 30 mA; 85 % at IO = 30 mA - 120 mA.
  • Switching at 1.2 MHz in typical.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STO-2016A TCXO GPS SIWARD
STO-2520 CRYSTAL OSCILLATOR SIWARD
STO-2520A TCXO GPS SIWARD
STO-2520B HCMOS TCXO SIWARD
STO-3225 CRYSTAL OSCILLATOR SIWARD

Other Datasheets by STMicroelectronics

Part Number Description
STOD1317B high efficiency boost converter + LDO
STOD14 700mA dual DC-DC converter
STOD1412 Step-up and inverting DC-DC converter
STOD02 Dual DC-DC converter
STOD03A Dual DC-DC converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STOD1812 Power supply for PMOLED display panel Features ■ Synchronous step-up converter ■ Input voltage range from 2.5 V to 5.5 V ■ Maximum output current 120 mA ■ Efficiency: 75 % at IO = 10 mA - 30 mA; 85 % at IO = 30 mA - 120 mA ■ Switching at 1.2 MHz in typical application conditions ■ Enable pin for shutdown mode ■ True load disconnect ■ Soft-start to limit inrush current ■ UVLO protection ■ Adjustable output voltage up to 20 V ■ Low quiescent current: < 1 µA in shutdown mode ■ Over-temperature protection ■ Package: DFN10L 3x3 mm, 0.