Datasheet4U Logo Datasheet4U.com

L99MOD51XP - Multi-output driver

Description

The L99MOD51XP is a microcontroller-driven multifunctional actuator driver for automotive applications.

Up to two DC motors and two grounded resistive loads can be driven with three half bridges and two hide-side drivers.

Features

  • AEC-Q100 qualified.
  • One half bridge for 7.4 A load (RDSon = 150 mΩ).
  • Two half bridges for 5 A load (RDSon = 200 mΩ).
  • Two high-side drivers for 1.25 A load (RDSon = 800 mΩ).
  • Programmable soft start function to drive loads with higher inrush currents (i. e. current > 7.4 A, >5 A, >1.25 A).
  • Very low current consumption in standby mode (IS < 3 μA, typ. , Tj  85 °C).
  • All outputs short circuit protected.
  • Current monitor output for all high-side drivers Applicati.

📥 Download Datasheet

Datasheet preview – L99MOD51XP

Datasheet Details

Part number L99MOD51XP
Manufacturer STMicroelectronics
File Size 1.24 MB
Description Multi-output driver
Datasheet download datasheet L99MOD51XP Datasheet
Additional preview pages of the L99MOD51XP datasheet.

📁 Similar Datasheet

  • L9911 - Car alternator multifunction smart voltage regulator (ST Microelectronics)
  • L9942 - Integrated stepper motor driver (ST Microelectronics)
  • L99PM62XP - Power Management (ST Microelectronics)
Other Datasheets by STMicroelectronics
  • L99MOD50XP - Multi-output driver
  • L99MOD53XP - Multi-output driver
  • L99MC6 - Configurable 6-channel device
  • L99MM70XP - Integrated microprocessor
  • L9907 - Automotive FET driver
  • L9908 - Automotive 3-Phase motor gate driver
  • L9914 - All silicon automotive voltage regulator
  • L9915 - C-terminal alternator voltage regulator

Full PDF Text Transcription

Click to expand full text
L99MOD51XP Multi-output driver for automotive applications Datasheet - production data  All outputs over temperature protected  Open-load diagnostic for all outputs  Overload diagnostic for all outputs  Programmable PWM control of all outputs  Charge pump output for reverse polarity protection Features  AEC-Q100 qualified  One half bridge for 7.4 A load (RDSon = 150 mΩ)  Two half bridges for 5 A load (RDSon = 200 mΩ)  Two high-side drivers for 1.25 A load (RDSon = 800 mΩ)  Programmable soft start function to drive loads with higher inrush currents (i.e.current > 7.4 A, >5 A, >1.25 A)  Very low current consumption in standby mode (IS < 3 μA, typ.
Published: |