Datasheet4U Logo Datasheet4U.com

L5988 - 4A step-down switching regulator

Description

Connecting a resistor between this pin and GND it is possible to increase the over current ILIM-ADJ protection threshold.

Connecting a resistor between this pin and VREF it is possible to decrease the over current protection threshold.

Features

  • 4A DC output current 2.9V to 18V input voltage Output voltage adjustable from 0.6V 400KHz switching frequency, programmable up to 1MHz Soft-start and inhibit 1.8V ± 2% reference voltage Low dropout operation: 100% duty cycle Voltage feed-forward Zero load current operation Sink current capability Over current, over voltage and thermal protection HTSSOP16 package.
  • HTSSOP16.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L5988D 4A continuous (more than 5 A pulsed) step-down switching regulator ST Microelectronics
L5989D DC-DC Conversion ST Microelectronics
L59 BI-POLAR AND BI-COLOR INDICATOR LAMPS Kingbright Corporation
L59EGW BI-POLAR AND BI-COLOR INDICATOR LAMPS Kingbright Corporation

Other Datasheets by STMicroelectronics

Part Number Description
L5980 0.7A step-down switching regulator
L5981 1A step-down switching regulator
L5983 1.5A step-down switching regulator
L5985 2A step-down switching regulator
L5986 2.5A step-down switching regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com L5988 4A step-down switching regulator with synchronous rectification Preliminary Data Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 4A DC output current 2.9V to 18V input voltage Output voltage adjustable from 0.6V 400KHz switching frequency, programmable up to 1MHz Soft-start and inhibit 1.
Published: |