Datasheet4U Logo Datasheet4U.com

L5958 - Multifunction voltage regulator

Description

The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level.

All the voltage regulators can be switched off through the three enable pins.

Table 1.

Features

  • L5958 six outputs:.
  • 8.5 V @ 200 mA.
  • 5.0 V @ 300 mA.
  • 3.3 V @ 250 mA.
  • 1.8 V @ 350 mA.
  • 3.3 V @ 100 mA standby.
  • 1.8 V @ 100 mA standby 2 A high side driver Reset function VDD core reset function Battery audio warning Battery can warning Ignition comparator Load dump protection Thermal shutdown Overcurrent limitation All pin ESD protected Flexiwatt27 (vertical) Flexiwatt27 (SMD).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L59 BI-POLAR AND BI-COLOR INDICATOR LAMPS Kingbright Corporation
L5988D 4A continuous (more than 5 A pulsed) step-down switching regulator ST Microelectronics
L5989D DC-DC Conversion ST Microelectronics
L59EGW BI-POLAR AND BI-COLOR INDICATOR LAMPS Kingbright Corporation

Other Datasheets by STMicroelectronics

Part Number Description
L5950 MULTIPLE MULTIFUNCTION VOLTAGE REGULATOR FOR CAR RADIO
L5951 TRIPLE OUTPUT MULTIFUNCTION VOLTAGE REGULATOR FOR CAR RADIO WITH IDR/CLASS 2 INTERFACE
L5952 MULTIPLE MULTIFUNCTION VOLTAGE REGULATOR
L5953 Multiple switching voltage regulator
L5954 Multiple multifunction voltage regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com L5958 Multifunction voltage regulator for car radio Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA – 1.8 V @ 350 mA – 3.3 V @ 100 mA standby – 1.8 V @ 100 mA standby 2 A high side driver Reset function VDD core reset function Battery audio warning Battery can warning Ignition comparator Load dump protection Thermal shutdown Overcurrent limitation All pin ESD protected Flexiwatt27 (vertical) Flexiwatt27 (SMD) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The two 3.3 V (REG5) and 1.8 V (REG6) stand-by regulators can reach a quasi-zero current consumption when switched off. The device is equipped with two different reset buffers to control the operating voltages: the reset which checks the two stand-by outputs, 3.3V and 1.
Published: |