Datasheet4U Logo Datasheet4U.com

L5170A - OCTAL LINE DRIVER

Description

L5170 is an octal line driver unit in DIP28 and PLCC28 packages intended for use in the EIA std RS232D, RS423A and CCITT V.10 and V.28 applications.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L5100 WHITE LED STEP-UP CONVERTER UTC
L5101 WHITE LED STEP-UP CONVERTER UTC
L5107 CONSTANT CUTTENT BOOST CONTROLLER Unisonic Technologies
L5109 WHITE LED STEP-UP CONVERTER UTC
L513ED-E 5mm Dia LED LAMP - Orange Diffused American Opto Plus LED

Other Datasheets by STMicroelectronics

Part Number Description
L5170 OCTAL LINE DRIVER
L5170D OCTAL LINE DRIVER
L5150BN Automotive 5V low dropout voltage regulator
L5150CJ 5V low dropout voltage regulator
L5150CS 5V low dropout voltage regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
L5170 OCTAL LINE DRIVER ADVANCE DATA OCTAL LINE DRIVER FOR: – EIA STD: RS232D; RS423A – CCIT: V.10; V.28 NO EXTERNAL COMPONENTS VERY LONG TRANSMISSION LINE (5000ft) 50V EOS OUTPUT PROTECTION DIP28 PLCC28 DESCRIPTION L5170 is an octal line driver unit in DIP28 and PLCC28 packages intended for use in the EIA std RS232D, RS423A and CCITT V.10 and V.28 applications. With no external components L5170 is able to drive a line up to 5000ft assuming the line capacitance is 35pF per ft and the capacitance of the filter connectors/protection components add up to BLOCK DIAGRAM ORDERING NUMBERS: L5170A L5170D the total capacitance load. The drivers typically run in short circuit current mode whenever the cable attached is over 500ft.
Published: |