Datasheet4U Logo Datasheet4U.com

L3000N - SLIC KIT OPTIMIZED

Download the L3000N datasheet PDF. This datasheet also covers the L3092 variant, as both devices belong to the same slic kit optimized family and are provided as variant models within a single manufacturer datasheet.

Description

The SLIC KIT (L3000S/L3092) is a set of solid state devices designed to integrate many of the functions needed to interface a telephone line.

It consists of 2 integrated devices ; the L3000S line interface circuit and the L3092 control unit.

Features

  • of the BORSHT functions: - Battery feed (balance mode) - Ringing Injection - Signalling Detection December 1997 - Hybrid Function The SLIC KIT injects the ringing signal in balanced mode and requires a positive supply voltage of typically + 72V to be available on the subscriber card. The L3000S/L3092 kit generates the ringing signal internally, avoiding the requirement for expensive external circuitry. A low level 1.5Vrms input is required. (This can be provided by the combo). A special operati.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (L3092_STMicroelectronics.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
L3010 1A HIGH POWER LED DRIVER UTC
L3012 1A HIGH POWER LED DRIVER Unisonic Technologies
L3060 30V/500mA HIGH DIMMING RATIO LED CONSTANT CURRENT DRIVER Unisonic Technologies
L3080 30V/800mA INTEGRATED POWER LED DRIVER UTC
L30ESDL5V0C6-4 ESD PROTECTION DIODE LITE-ON

Other Datasheets by STMicroelectronics

Part Number Description
L3000 SUBSCRIBER LINE INTERFACE KIT
L3000S SUBSCRIBER LINE INTERFACE KIT
L3030 SUBSCRIBER LINE INTERFACE KIT
L3037 SUBSCRIBER LINE INTERFACE CIRCUIT
L3092 SLIC KIT OPTIMIZED

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com L3000S L3092 SLIC KIT OPTIMIZED FOR APPLICATIONS WITH BOTH FIRST AND SECOND GENERATION COMBOS PROGRAMMABLE DC FEED RESISTANCE AND LIMITING CURRENT (25/40/60mA) LOW ON-HOOK POWER DISSIPATION (50mW typ) SIGNALLING FUNCTION (off-hook/GND-Key) QUICK OFF-HOOK DETECTION IN CVS FOR LOW DISTORTION (< 1 %) DIAL PULSE DETECTION HYBRID FUNCTION RINGING GENERATION WITH QUASI ZERO OUTPUT IMPEDANCE, ZERO CROSSING INJECTION (no ext. relay needed) AND RING TRIP DETECTION ABSOLUTELY NO NOISE INJECTED ON ADIACENT LINES DURING RINGING SEQUENCE AUTOMATIC RINGING STOP WHEN OFFHOOK IS DETECTED TEST MODE ALLOWS LINE LENGHT MEASUREMENT PARALLEL LATCHED DIGITAL INTERFACE LOW NUMBER OF EXTERNAL COMPONENTS WITH STANDARD TOLERANCE ONLY : 9 1% RESISTORS AND 5 10-20% CAPACITORS (for 600 ohm appl.
Published: |