TS834 - MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER

STMicroelectronics

General Description

The TS834 is a voltage supervisor providing two different outputs (one active low and one active high) with an integrated timer that can be disabled.

It incorporates a high stability bandgap voltage reference and a comparator with open drain output.

📥 Download Datasheet

TS834 micropower voltage supervisor reset active low or high integrated timer by STMicroelectronics - Datasheet Preview

Datasheet Details

Part number	TS834
Manufacturer	STMicroelectronics
File Size	392.83 KB
Description	MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER
Datasheet	TS834 Datasheet

Other Datasheets by STMicroelectronics

Part Number	Description
TS831	MICROPOWER VOLTAGE SUPERVISOR
TS835	THYRISTORS
TS836	MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE HIGH
TS820	Sensitive and standard 8A SCRs
TS821	1.225V micropower shunt voltage reference
TS822	2.5V micropower shunt voltage reference
TS824-1.2	HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE
TS824-2.5	HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TS834 MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER s ULTRA LOW POWER CONSUMPTION : 12µA max. @ VCC = 5V s BOTH ACTIVE HIGH AND ACTIVE LOW OUTPUTS s RESET TIMER WITH DISABLE FUNCTION s PRECISION RESET THRESHOLD (guaran- teed over Temperature) s 4.33V typ. THRESHOLD VOLTAGE s GUARANTEED RESET OPERATION DOWN TO 1.5V s OPEN DRAIN OUTPUT WITH s Vol = 450mV typ.@ Iol = 8mA & VCC = 4V s FAST RESPONSE TIME : 20µs FOR A 10mV OVERDRIVE s 100mV INTERNAL HYSTERESIS DESCRIPTION The TS834 is a voltage supervisor providing two different outputs (one active low and one active high) with an integrated timer that can be disabled. It incorporates a high stability bandgap voltage reference and a comparator with open drain output. The threshold voltage is set at 4.