Datasheet4U Logo Datasheet4U.com

ST75C185 - LOW POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS

General Description

The ST75C185 is low power BICMOS device containing three independent drivers and five receivers that is used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE).

This device has been designed to conform to Standards ANSI/EIA-232-E.

Key Features

  • eliminate the need of external components. The ST75C185 hasn’t a power sequence fault condition. It has been designed using low-power techniques in a BICMOS tecnology. In most.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST75C540 SUPER INTEGRATED DEVICES STMicroelectronics
ST7511U 640 x 320 Mono-color TFT-LCD Controller/Driver Sitronix
ST7522 17 x 96 Dot Matrix LCD Controller Sitronix
ST7525 192 x 65 Dot Matrix LCD Controller/Driver Sitronix
ST7525-G4 192 x 65 Dot Matrix LCD Controller/Driver Sitronix

Other Datasheets by STMicroelectronics

Part Number Description
ST75C176 LOW POWER RS-485/RS-422 TRANSCEIVER
ST75C520 HIGH SPEED FAX MODEM DATA PUMP
ST75C530 SUPER INTEGRATED DEVICESWITH DSP
ST750A ADJUSTABLE STEP-DOWN / CURRENT-MODE PWM DC-DC CONVERTERS
ST75185 MULTIPLE RS-232 DRIVERS AND RECEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® ST75C185 LOW POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS TARGET DATA s s s s s s s s s s MEETS STANDARD EIA-232-E SINGLE CHIP WITH INTERFACE BETWEEN UART AND SERIAL PORT CONNECTOR LESS THAN 20mW QUIESCENT POWER CONSUMPTION WIDE DRIVER SUPPLY VOLTAGE: 7 TO 13.2V DRIVER OUTPUT SLEW RATE LIMITED TO 30V/µs MAX RECEIVER INPUT HYSTERESIS: 1.1 TYP PUSH-PULL RECEIVER OUTPUTS ON CHIP RECEIVER 1µs NOISE FILTER FUNCTIONALLY INTERCHANGEABLE WITH STM ST75185 ESD PROTECTION: ±10KV HUMAN BODY MODEL (Micro Package) (Plastic Package) (TSSOP Package) DESCRIPTION The ST75C185 is low power BICMOS device containing three independent drivers and five receivers that is used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE).