Datasheet4U Logo Datasheet4U.com

ST24W04 - 4 Kbit Serial I2C Bus EEPROM

General Description

This specification covers a range of 4 Kbits I2C bus EEPROM products, the ST24/25C04 and the ST24/25W04.

In the text, products are referred to as ST24/25x04, where "x" is: "C" for Standard version and "W" for hardware Write Control version.

Table 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST2411 Self Drive Piezo Transducer SOUND COMPONENTS
ST2451D4 1-Line Uni-directional TVS Diode Sursemi
ST2451S5 1-Line Uni-directional TVS Diode Sursemi
ST24D12 DC Control Solid-State Relays Teledyne
ST24D25 DC Control Solid-State Relays Teledyne

Other Datasheets by STMicroelectronics

Part Number Description
ST24W01 SERIAL 1K 128 x 8 EEPROM
ST24W01 SERIAL 1K 128 x 8 EEPROM
ST24W02 SERIAL 2K (256 x 8) EEPROM
ST24W08 8 Kbit Serial I2C Bus EEPROM
ST24W08 8-Kbit Serial I2C Bus EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ST24C04, ST25C04 ST24W04, ST25W04 4 Kbit Serial I2C Bus EEPROM with User-Defined Block Write Protection 1 MILLION ERASE/WRITE CYCLES with 40 YEARS DATA RETENTION SINGLE SUPPLY VOLTAGE: – 3V to 5.5V for ST24x04 versions – 2.5V to 5.5V for ST25x04 versions HARDWARE WRITE CONTROL VERSIONS: ST24W04 and ST25W04 PROGRAMMABLE WRITE PROTECTION TWO WIRE SERIAL INTERFACE, FULLY I2C BUS COMPATIBLE BYTE and MULTIBYTE WRITE (up to 4 BYTES) PAGE WRITE (up to 8 BYTES) BYTE, RANDOM and SEQUENTIAL READ MODES SELF TIMED PROGRAMMING CYCLE AUTOMATIC ADDRESS INCREMENTING ENHANCED ESD/LATCH UP PERFORMANCES 8 1 PSDIP8 (B) 0.25mm Frame 8 1 SO8 (M) 150mil Width Figure 1. Logic Diagram DESCRIPTION This specification covers a range of 4 Kbits I2C bus EEPROM products, the ST24/25C04 and the ST24/25W04.