Datasheet4U Logo Datasheet4U.com

LCP12 - Protection IC for ringing SLICs

Description

The LCP12 has been developed to protect SLICs operating on both negative and positive battery supplies, as well as high voltage SLICs.

It provides crowbar mode protection for both TIP and RING lines.

Features

  • Protection IC recommended for ringing SLICs.
  • Wide firing voltage range: -120 V to +120 V.
  • Low gate triggering current: IG = 5 mA max.
  • Peak pulse current: IPP = 50 A (10/1000 µs).
  • Holding current: IH = 150 mA min.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LCP100E 1W Miniature SMT DC/DC Con vert ers micropowerdirect
LCP101E 1W Miniature SMT DC/DC Con vert ers micropowerdirect
LCP102E 1W Miniature SMT DC/DC Con vert ers micropowerdirect
LCP103E 1W Miniature SMT DC/DC Con vert ers micropowerdirect
LCP104E 1W Miniature SMT DC/DC Con vert ers micropowerdirect

Other Datasheets by STMicroelectronics

Part Number Description
LCP150S PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION
LCP1511D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION
LCP1521 PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION
LCP02-150B1 PROTECTION IC FOR RINGING SLICS
LCP02-150M PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR RINGING SLICS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LCP12 Protection IC for ringing SLICs SO-8 wide LCP12 Features • Protection IC recommended for ringing SLICs • Wide firing voltage range: -120 V to +120 V • Low gate triggering current: IG = 5 mA max • Peak pulse current: IPP = 50 A (10/1000 µs) • Holding current: IH = 150 mA min.
Published: |