Datasheet4U Logo Datasheet4U.com

SM10B-SRSS-TB - Disconnectable Insulation displacement connectors

Download the SM10B-SRSS-TB datasheet PDF. This datasheet also covers the BM02B variant, as both devices belong to the same disconnectable insulation displacement connectors family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • Ultra-compact insulation displacement connector 1.0mm (.039") pitch and only 3.0mm (.118") high (side entry type). This connector is only about 61% as large as the smallest conventional (JST) IDC designs.
  • Header designed for vacuum pick and place robotics Althou.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BM02B-xxxx.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number SM10B-SRSS-TB
Manufacturer SR
File Size 104.91 KB
Description Disconnectable Insulation displacement connectors
Datasheet download datasheet SM10B-SRSS-TB Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SM10B-XSRS-ETB XSR CONNECTOR JST
SM10 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR MIC
SM100 Rectifier Diode Semtech
SM100 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR MIC
SM1002 MELF PIN Diodes Microsemi

Other Datasheets by SR

Part Number Description
SM11B-SRSS-TB Disconnectable Insulation displacement connectors
SM12B-SRSS-TB Disconnectable Insulation displacement connectors
SM13B-SRSS-TB Disconnectable Insulation displacement connectors
SM14B-SRSS-TB Disconnectable Insulation displacement connectors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IDC SR CONNECTOR Emboss Tape 1.0mm (.039") pitch Disconnectable Insulation displacement connectors Features –––––––––––––––––––––––– • Ultra-compact insulation displacement connector 1.0mm (.039") pitch and only 3.0mm (.118") high (side entry type). This connector is only about 61% as large as the smallest conventional (JST) IDC designs. • Header designed for vacuum pick and place robotics Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum grippig equipment. Since there is enough flat surface for secure vacuum gripping, this miniature surface mount connector is versatile for designers and economic for manufacturing.