Datasheet4U Logo Datasheet4U.com

S72NS-N - Based MCPs

Description

of Spansion data sheet designations are presented here to highlight their presence and definitions.

The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not committed any design to production.

Features

  • Power supply voltage of 1.7 V to 1.95 V.
  • Burst Speeds.
  • Flash = 66 MHz, 80 MHz.
  • DRAM = 133 MHz.
  • Packages, 133-ball FBGA.
  • 11.0 x 10.0 x 1.0 mm.
  • 8.0 x 8.0 x 1.0 mm.
  • Operating Temperature of 25°C to +85°C Product Selector Guide Device- Model# S72NS256ND0-7K S72NS256ND0-7J S72NS256ND0-73 S72NS256ND0-72 S72NS128ND0-1K S72NS128ND0-1J S72NS128ND0-13 S72NS128ND0-12 S72NS512ND0-7K S72NS512ND0-7J S72NS512ND0-73 S72NS512ND0-72 S72NS51.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S72N23 Standard Voltage Detector AUK corp
S72N23SF Standard Voltage Detector AUK corp
S72N23UF Standard Voltage Detector AUK corp
S72N25 Standard Voltage Detector AUK corp
S72N25SF Standard Voltage Detector AUK corp

Other Datasheets by Spansion (now Infineon)

Part Number Description
S72NS-P MirrorBit Flash Memory and DRAM
S72NS128N Based MCPs
S72NS128P MirrorBit Flash Memory and DRAM
S72NS256N Based MCPs
S72NS256P MirrorBit Flash Memory and DRAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com S72NS-N Based MCPs Stacked Multi-Chip Product (MCP) MirrorBitTM Flash Memory & DRAM 128 Mb (8 M x 16 bit)/256 Mb (16 M x 16 bit), 110nm CMOS 1.8 Volt-only, Multiplexed, Simultaneous Read/Write, Burst Mode Flash Memory and 128/256-Mb (8/16-M x 16-bit) DDR DRAM Data Sheet ADVANCE INFORMATION Notice to Readers: The Advance Information status indicates that this document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.
Published: |