Datasheet4U Logo Datasheet4U.com

S71PL512ND0 - Page-Mode Flash Memory

Description

of Spansion data sheet designations are presented here to highlight their presence and definitions.

The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not committed any design to production.

Features

  • Speed.
  • Flash: 70 ns.
  • pSRAM: 70 ns.
  • Packages.
  • 84-Ball Fine-Pitch Ball Grid Array (FBGA), 8.0 x 11.6 x 1.4 mm.
  • Operating Temperature Range.
  • Temperature Range of.
  • 25°C to +85°C Product Selector Guide MCP S71PL512ND0-5B Flash 2 x S29PL256N pSRAM Density 128M pSRAM Type Type 2 Publication Number S71PL512ND0_00 Revision A Amendment 2 Issue Date December 6, 2005 This document contains information on one or more products under.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S7105-04 POSITION SENSITIVE DETECTOR ETC
S7105-05 POSITION SENSITIVE DETECTOR ETC
S7105-06 POSITION SENSITIVE DETECTOR ETC
S7123AM Bipolar Linear Integrated Circuit AUK corp
S7123SF Bipolar Linear Integrated Circuit AUK corp

Other Datasheets by Spansion (now Infineon)

Part Number Description
S71PL-J Based MCPs
S71PL-N MirrorBit MCPs
S71PL032J (S71PLxxx) STACKED MULTI CHIP PRODUCT FLASH MEMORY AND RAM
S71PL032J Based MCPs
S71PL064 (S71PLxxx) STACKED MULTI CHIP PRODUCT FLASH MEMORY AND RAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com S71PL512ND0 MirrorBit™ Flash Family Two S29PL256N Devices (32 M x 16-Bit) CMOS 3.0-Volt only Simultaneous Read/Write, Page-Mode Flash Memory Data Sheet PRELIMINARY Notice to Readers: This document indicates states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that a product qualification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document may be revised by subsequent versions or modifications due to changes in technical specifications.
Published: |