SIT1051AQ Datasheet | SIT

芯力特 SIT1051AQ 5V, ±58V BUS, patible with 3.3V MCU, 5Mbps silent CAN FD transceiver Features PRODUCT APPEARANCE - Fully patible with the ISO 11898 standard - Thermally protected - ±58V BUS protection - Driver (TXD) dominant overtime function - Silent receive mode - SIT1051AQT/E with off mode in low power consumption - SIT1051AQT/3 can be interfaced directly to microcontrollers with supply voltages from 3V to 5V - Undervoltage protection on VCC and VIO power supply pins - Timing guaranteed for data rates up to 5 Mbit/s in the (CAN FD) fast phase - The typical loop delay from TXD to RXD is less than 100ns - Very low ElectroMagnetic Emission (EME) - Unpowered nodes do not interfere with the bus - Provide DFN3- 3-8/ HVSON8, Small Outline, Leadless Package Provide Green and Environmentally Friendly Lead-free package DESCRIPTION SIT1051AQ is an interface chip used between the CAN protocol controller and the physical bus. It can be used in trucks, buses, cars, industrial control and other fields. It supports 5Mbps (CAN FD), and has the ability to perform differential signal transmission between bus and the CAN protocol controller. The SIT1051AQ is an upgraded version of the SIT1051Q with improved bus signal symmetry and lower electromagnetic radiation performance. In addition, the SIT1051AQ is fully patible with SIT1051Q. PARAMETER SYMBOL CONDITION MIN. Supply voltage Maximum transmission rate VCC...