SD6856GTR Datasheet PDF (PRIMARY SIDE CONTROL SMPS) | Download SILAN MICROELECTRONICS SD6856GTR

SD6856GTR - PRIMARY SIDE CONTROL SMPS

Download the SD6856GTR datasheet PDF (SD6855 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for primary side control smps.

Description

loop for high average efficiency and reliability.

Features

Primary side control.
Low start-up current.
Leading edge blanking.
Pulse-Frequency Modulation(PFM).
Overvoltage protection.
Undervoltage lockout.
Over temperature protection.
Cycle by cycle current limiting.
Open loop protection.
High voltage spotlight.
Bulb light.
PAR light.

📥 Download Datasheet

SD6856GTR primary side control smps by SILAN MICROELECTRONICS - Datasheet Preview — Note: The manufacturer provides a single datasheet file (SD6855-SILANMICROELECTRONICS.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	SD6856GTR
Manufacturer	SILAN MICROELECTRONICS
File Size	400.97 KB
Description	PRIMARY SIDE CONTROL SMPS
Datasheet	SD6856GTR Datasheet

📁 Similar Datasheet

SD680CS - Surface mount schottky barrier rectifiers (Semitel)

SD680CS - 6.0A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (WON-TOP)

SD680CS - (SD620CS - SD6100CS) DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (Pan Jit International)

SD680CT - (SD620CT - SD6100CT) SCHOTTKY BARRIER RECTIFIER (Pan Jit International)

SD6830 - 4-BIT MICROCONTROLLER (AUK)

SD6830 - Built-in high-voltage power switch current mode PWM+PFM Controller (SL)

SD6832 - CURRENT MODE PWM+PFM CONTROLLER (SL)

SD6834 - Built-in high-voltage MOSFET current-mode PWM+PFM Controller (SL)

SD6835 - CURRENT MODE PWM+PFM CONTROLLER (SL)

SD6000C - STANDARD RECOVERY DIODES (International Rectifier)

Full PDF Text Transcription

Click to expand full text

SD6855/6_Datasheet PRIMARY SIDE CONTROL SMPS FOR LED DRIVER DESCRIPTION SD6855/6 is a primary side control SMPS for LED driver with accurate constant voltage, constant current (CV/CC) control loop for high average efficiency and reliability. Using SD6855/6 for system design can reduce the component count without using opto-coupler, secondary feedback control, and loop compensation circuit, which will reduce the BOM cost. The output voltage can be set by the feedback resistor and the output current can be set by peak current sensing resistor within a certain output power range, which can meet the requirements SOT-23-6L of different solutions for driving LEDs in series or in parallel.

Published: Jul 2, 2015 |