Datasheet4U Logo Datasheet4U.com

SGM2567 - Load Switch

Datasheet Summary

Description

The SGM2567 is a single load switch with reverse current protection function.

The device can operate from 1V to 5.5V single supply and has the ability to drive up to 4A continuous current.

The device contains a 15mΩ low RON N-MOSFET controlled by the ON pin.

Features

  • Input Voltage Range: 1V to 5.5V.
  • Maximum Continuous Current: 4A.
  • Low On-Resistance.
  • RON = 15mΩ at VIN = 5V.
  • RON = 15mΩ at VIN = 3.3V.
  • Low Shutdown Current: 170nA (TYP).
  • Reverse Current Protection When Disabled.
  • Low Threshold 1.8V GPIO Control Input.
  • Bidirectional Power Supply for Power Zone.

📥 Download Datasheet

Datasheet preview – SGM2567

Datasheet Details

Part number SGM2567
Manufacturer SG Micro
File Size 960.63 KB
Description Load Switch
Datasheet download datasheet SGM2567 Datasheet
Additional preview pages of the SGM2567 datasheet.

📁 Similar Datasheet

  • SGM20 - compact physical dimensions (Sumitiomo)
  • SGM2005 - Linear Regulators (Shengbang Microelectronics)
  • SGM2006 - RF-Linear Regulators (Shengbang Microelectronics)
  • SGM2006A - RF-Linear Regulators (Shengbang Microelectronics)
  • SGM2007 - Linear Regulators (Shengbang Microelectronics)
  • SGM2007A - Linear Regulators (Shengbang Microelectronics)
  • SGM2008 - Linear Regulators (Shengbang Microelectronics)
  • SGM2013N - GaAs N-channel Dual-Gate MES FET (Sony Corporation)
  • SGM2014AM - GaAs N-channel Dual-Gate MES FET (Sony Corporation)
  • SGM2014AN - GaAs N-channel Dual-Gate MES FET (Sony Corporation)
Other Datasheets by SG Micro
  • SGM2560 - Dual-Channel Power Distribution Switch
  • SGM2564 - Load Switch
  • SGM25661 - Ultra-Low On-Resistance Load Switch
  • SGM2566C - On-Resistance Load Switch
  • SGM2521 - Programmable Current Limit Switches
  • SGM2521A - Programmable Current Limit Switches
  • SGM2522 - Programmable Current Limit Switches
  • SGM2522A - Programmable Current Limit Switches

Full PDF Text Transcription

Click to expand full text
SGM2567 5.5V, 4A, 15mΩ RON Load Switch with Reverse Current Protection GENERAL DESCRIPTION The SGM2567 is a single load switch with reverse current protection function. The device can operate from 1V to 5.5V single supply and has the ability to drive up to 4A continuous current. The device contains a 15mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.
Published: |