Datasheet4U Logo Datasheet4U.com

BU9729K - Segment-type LCD driver

Description

Pin name OSC1 OSC2 VSS VC VLCD VDD SCK Pin No.

I I/O I O

Function These are the I / O pins for the internal oscillator.

Resistance should be connected between the pins when the internal clock is operating.

Features

  • 1) Serial interface (8-bit length). 2) Display RAM: 72bits, internal (up to 72 segments can be displayed). 3) Internal power supply circuit for liquid crystal drive. 4) Display duty: 1 / 4. 5) Low-voltage and low-current operation supported.
  • Block diagram VLCD VC LCD Driver Bias Circuit VDD VSS SEG1 SD SCK C/D CS Serial Interface Address Counter Display Data RAM (DD RAM) LCD Segment Driver 18bits SEG18 SEG2 Command / Data Register LCD Common Driver 4bits COM1 COM2 COM3 C.

📥 Download Datasheet

Datasheet Details

Part number BU9729K
Manufacturer ROHM
File Size 146.43 KB
Description Segment-type LCD driver
Datasheet download datasheet BU9729K Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BU97933ACH-3BW Dot-matrix 128 x 33 STN LCD Control Driver ROHM Electronics
BU9798GUW Multifunction Segment Drivers ROHM Electronics
BU9798KV Multifunction Segment Drivers ROHM Electronics
BU9-103R25BL Common Mode Chokes Coilcraft
BU9-1320R7BL Common Mode Chokes Coilcraft

Other Datasheets by ROHM

Part Number Description
BU9729 Segment-type LCD driver
BU9728 LCD driver for segment-type LCDs
BU9728AKV LCD driver for segment-type LCDs
BU9706 LCD segment driver
BU9706KS LCD segment driver

Full PDF Text Transcription

Click to expand full text
Standard ICs Segment-type LCD driver BU9729K The BU9729K is a driver for segmented liquid crystal displays, which enables connection with a microcomputer through a serial interface. 4-bit common output and an internal power supply circuit for LCD drive make it possible to configure a low-cost display system. Applications • Movie projectors, car audio equipment, telephones Features • 1) Serial interface (8-bit length). 2) Display RAM: 72bits, internal (up to 72 segments can be displayed). 3) Internal power supply circuit for liquid crystal drive. 4) Display duty: 1 / 4. 5) Low-voltage and low-current operation supported.
Published: |