Datasheet4U Logo Datasheet4U.com

BH7881EFV - Stereo Speaker / Headphone Amplifier

Description

The BH7881EFV is a low voltage, low noise, high output speaker/headphone amplifier IC, in which a Bi-CMOS process is used.

An on-chip speaker amplifier circuit that is capable of 2W+2W output can be used as a headphone amplifier by switching the operating mode.

Features

  • 1) Built-in low saturation type regulator (Digital power supply driver, voltage and current variable, short circuit detection) 2) Bass boost mode, gain switching functions 3) Speaker MUTE function (Headphone mode) 4) Built-in line amplifier output (gain adjustment, LPF setting) active/suspend function (TTL input control pin) 5) Hysteretic thermal shutdown function (Set for approximately 150℃ /90℃) 6) IC protection function (SP pin VCC/GND short circuit detection) 7) Speaker protection function.

📥 Download Datasheet

Datasheet Details

Part number BH7881EFV
Manufacturer ROHM
File Size 419.13 KB
Description Stereo Speaker / Headphone Amplifier
Datasheet download datasheet BH7881EFV Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BH7821BFP-Y Headphone/Speaker amplifier ETC
BH7823AFVM Audio driver ETC
BH7636S Video Switch for Canal+ ETC

Other Datasheets by ROHM

Part Number Description
BH7884EFV Stereo Speaker / Headphone Amplifier
BH7800K Single chip Hi-Fi audio signal processor
BH7801BK Single chip Hi-Fi audio signal processor
BH7802K Single chip Hi-Fi audio signal processor
BH7824FVM 1.1W to1.5W Monaural Speaker Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Class-AB Speaker Amplifiers 2W + 2W Stereo Speaker / Headphone Amplifier BH7881EFV No.10077EAT05 ●Description The BH7881EFV is a low voltage, low noise, high output speaker/headphone amplifier IC, in which a Bi-CMOS process is used. An on-chip speaker amplifier circuit that is capable of 2W+2W output can be used as a headphone amplifier by switching the operating mode. This makes it possible to configure an audio system using few external devices. With a built-in, low saturation regulator with programmable output voltage and output current, clear tone quality is obtained even when directly connected to a digital power supply. A peripheral analog circuit can also be regulator driven.
Published: |