Datasheet4U Logo Datasheet4U.com

BA9710KV - 4-channel switching regulator

Description

BA9710KV 303 Regulator ICs FElectrical characteristics (unless otherwise noted, Ta = 25_C and VCC = 6V) BA9710KV 304 Regulator ICs BA9710KV FReference data (unless otherwise noted, Ta = 25_C and VCC = 6V) 305 Regulator ICs FElectrical characteristic curves BA9710KV FExternal dimensions

Features

  • 1) Reference voltage precision is ±1%. 2) Output stages are based on the push-pull method (resembling the totem-pole method), and ON and OFF currents can be set independently. FAbsolute maximum ratings (Ta = 25_C) 3) Triangular waves can be externally synchronized. 4) Pins allow ON / OFF control of channels 3 and 4, or all channels at once. FRecommended operating conditions (Ta = 25_C) 301 Regulator ICs FBlock diagram BA9710KV 302 Regulator ICs FPin.

📥 Download Datasheet

Datasheet Details

Part number BA9710KV
Manufacturer ROHM
File Size 153.66 KB
Description 4-channel switching regulator
Datasheet download datasheet BA9710KV Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BA9741 TWO-CHANNEL SWITCHING REGULATOR CONTORLLER UTC
BA9741A TWO-CHANNEL SWITCHING REGULATOR CONTORLLER UTC
BA979 Silicon PIN Diodes Vishay Telefunken
BA979S Silicon PIN Diodes Vishay Telefunken
BA93 MINIATURE BAYONET 9MM T1 3/4 THREE CLUSTER ULTRA BRIGHT LEDS ETC

Other Datasheets by ROHM

Part Number Description
BA9700A Switching regulator for DC / DC Converters
BA9700AF Switching regulator for DC / DC Converters
BA9700AFV Switching regulator for DC / DC Converters
BA9707KV 4-channel switching regulator
BA9708K 3-channel switching regulator

Full PDF Text Transcription

Click to expand full text
Regulator ICs 4-channel switching regulator BA9710KV The BA9710KV, a 4-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel PNP transistors directly. Channels 2 and 3 can be used for motor control because protection circuits are not built in. FApplications VCRs and other portable equipment FFeatures 1) Reference voltage precision is ±1%. 2) Output stages are based on the push-pull method (resembling the totem-pole method), and ON and OFF currents can be set independently. FAbsolute maximum ratings (Ta = 25_C) 3) Triangular waves can be externally synchronized. 4) Pins allow ON / OFF control of channels 3 and 4, or all channels at once.
Published: |