Datasheet4U Logo Datasheet4U.com

BA5415A - High-output dual power amplifier

Features

  • 1) High output. POUT = 5.4W (VCC = 12V, RL = 3Ω and THD = 10%) POUT = 2.5W (VCC = 9V, RL = 4Ω and THD = 10%) 2) Excellent audio quality. THD = 0.1% (f = 1kHz, PO = 0.5W) VNO = 0.3mVrms (Rg = 10kΩ) RR = 60dB (fRR = 100Hz) 3) Wide operating power suppy voltage range. VCC = 5.0V to 18.0V (BA5416: 5.0V to 15.0V) 4) Switching noise (“pop” noise) generated when the power is switched on and off is small. 5) Ripple mixing when motor starts has been prevented. 6) Built-in thermal shutout. 7) Built-in st.

📥 Download Datasheet

Datasheet preview – BA5415A

Datasheet Details

Part number BA5415A
Manufacturer ROHM
File Size 257.48 KB
Description High-output dual power amplifier
Datasheet download datasheet BA5415A Datasheet
Additional preview pages of the BA5415A datasheet.

📁 Similar Datasheet

  • BA5413 - Power Amplifier (ETC)
  • BA5417 - HIGH-OUTPUT DUAL POWER AMPLIFIER (Unisonic Technologies)
  • BA543 - (BA5xx) Diodes (Iskra Semic)
  • BA544 - (BA5xx) Diodes (Iskra Semic)
  • BA545 - Silicon Planar Signal Diodes (Iskra Semic Capacitors)
  • BA545 - (BA5xx) Diodes (Iskra Semic)
  • BA545AL - Low Leakage Diode (Philips)
  • BA546 - (BA5xx) Diodes (Iskra Semic)
  • BA505 - DC / DC Converters (XPiQ)
  • BA5096 - BA5096 (ETC)
Other Datasheets by Rohm
  • BA5410 - 12 V-5.2 W dual channel power amplifier
  • BA5412 - Power Amplifier
  • BA5416 - High-output dual power amplifier
  • BA5417 - High-output dual power amplifier
  • BA5402A - 12V - 4.2W Dual Power Amplifier
  • BA5404 - Single Power Amplifier
  • BA5406 - 12V / 5W dual power amplifier
  • BA5408 - Dual Power Amplifier

Full PDF Text Transcription

Click to expand full text
Audio ICs High-output dual power amplifier BA5415A / BA5416 The BA5415A and BA5416 are dual power amplifier ICs that operate off a 9V to 15V supply. When driving a 4Ω load off a 9V supply, the BA5415A does not require a heatsink. The BA5416 uses a lost-cost package. The basic characteristics (total harmonic distortion etc.) of the amplifiers are excellent, and both ICs include a standby switch function. FApplications Radio cassette players. FFeatures 1) High output. POUT = 5.4W (VCC = 12V, RL = 3Ω and THD = 10%) POUT = 2.5W (VCC = 9V, RL = 4Ω and THD = 10%) 2) Excellent audio quality. THD = 0.1% (f = 1kHz, PO = 0.5W) VNO = 0.3mVrms (Rg = 10kΩ) RR = 60dB (fRR = 100Hz) 3) Wide operating power suppy voltage range. VCC = 5.0V to 18.0V (BA5416: 5.0V to 15.
Published: |