Datasheet4U Logo Datasheet4U.com

RTQ6343 - Asynchronous Step-Down Converter

Description

The RTQ6343 is a 3.5A, high-efficiency, peak current mode control asynchronous step-down converter.

The device operates with input voltages from 4V to 42V.

The device can program the output voltage between 0.8V to VIN.

Features

  • Wide Input Voltage Range  4.5V to 42V  4V to 42V (Soft-start is finished).
  • Wide Output Voltage Range : 0.8V to VIN.
  • 0.8V ±1% Reference Accuracy.
  • Peak Current Mode Control.
  • Integrated 80mΩ High-Side MOSFET.
  • Low Quiescent Current : 100μA.
  • Low Shutdown Current : 2.25μA.
  • Adjustable Switching : 100kHz to 2.5MHz.
  • Synchronizable Switching : 300kHz to 2.2MHz.
  • Power Saving Mode (PSM) at Light Load.
  • Low Dropout at Light Loads with Integrated Boot R.

📥 Download Datasheet

Datasheet preview – RTQ6343

Datasheet Details

Part number RTQ6343
Manufacturer Richtek
File Size 635.49 KB
Description Asynchronous Step-Down Converter
Datasheet download datasheet RTQ6343 Datasheet
Additional preview pages of the RTQ6343 datasheet.

📁 Similar Datasheet

Other Datasheets by Richtek
  • RTQ6342 - Asynchronous Step-Down Converter
  • RTQ6361 - Asynchronous Step-Down Converter
  • RTQ6050 - High-Side Measurement Current Shunt Monitor
  • RTQ6052 - High-Side Measurement Current Shunt Monitor
  • RTQ6056 - Bi-Directional Current and Power Monitor
  • RTQ6059 - Bi-Directional Current and Power Monitor
  • RTQ6749-QT-A2 - TFT LCD Integrated Power Module
  • RTQ6752-QT - TFT LCD Integrated Power Module

Full PDF Text Transcription

Click to expand full text
® RTQ6343 42VIN, 3.5A, Asynchronous Step-Down Converter with Low Quiescent Current General Description The RTQ6343 is a 3.5A, high-efficiency, peak current mode control asynchronous step-down converter. The device operates with input voltages from 4V to 42V. The device can program the output voltage between 0.8V to VIN. The low quiescent current design with the integrated low RDS(ON) of high-side MOSFET achieves high efficiency over the wide load range. The peak current mode control with simple external compensation allows the use of small inductors and results in fast transient response and good loop stability. The wide switching frequency of 100kHz to 2500kHz allows for efficiency and size optimization when selecting the output filter components.
Published: |