RT9209 Datasheet PDF (Synchronous Buck PWM DC-DC)

RT9209 - Synchronous Buck PWM DC-DC

Description

The RT9209/A is a single power supply PWM DC-DC converter controller designed to drive N-MOSFET in a synchronous buck topology.

The IC integrates the control, output adjustment, monitoring and protection functions into a small 8-pin package.

Features

z z z z z z z z z z z z Operates at 5V 0.8V Internal Reference Drives Two N-MOSFET Voltage Mode PWM Control Fast Transient Response Fixed 260kHz/400kHz Oscillator Frequency Dynamic 0 to 100% Duty Cycle Internal PWM Loop Compensation Internal Soft-Start Adaptive Non-Overlapping Gate Driver Over-Voltage Protection Uses Lower MOSFET RoHS Compliant and 100% Lead (Pb)-Free.

Datasheet Details

Part number	RT9209
Manufacturer	Richtek
File Size	232.51 KB
Description	Synchronous Buck PWM DC-DC
Datasheet	RT9209 Datasheet
Additional preview pages of the RT9209 datasheet.

📁 Similar Datasheet

RT9201 - High Efficiency PWM Step-Down DC-DC Converter (Richtek Technology)

RT9205 - Dual Regulators - Synchronous Buck PWM DC-DC and Linear Controller (Richiek)

RT9205A - Dual Regulators - Synchronous Buck PWM DC-DC and Linear Controller (Richiek)

RT9206 - Synchronous Buck (Richtek Technology Corporation)

RT9214 - 5V/12V Synchronous Buck PWM DC-DC Controller (Richtek Technology)

RT922 - high output current dual operational amplifier (STMicroelectronics)

RT9221 - PROGRAMMABLE SYNCHRONOUS PWM BUCK CONVERTER (Richtek Technology)

RT9223 - 5 BIT PROGRAMMABLE SYNCHRONOUS PWM BUCK CONVERTER CONTROLLER (Richtek Technology)

RT9224 - 5-Bit Programmable Synchronous PWM Buck Converter Controller and Output Voltage Monitor (Richtek Technology)

RT9224C - VRM 9.0 Synchronous PWM Buck Converter Controller and Output Voltage Monitor (Richtek Technology)

Full PDF Text Transcription

Click to expand full text

RT9209/A Synchronous Buck PWM DC-DC with Enable & PGOOD General Description The RT9209/A is a single power supply PWM DC-DC converter controller designed to drive N-MOSFET in a synchronous buck topology. The IC integrates the control, output adjustment, monitoring and protection functions into a small 8-pin package. The RT9209/A uses an internal compensated voltage mode PWM control for simple application design. An internal 0.8V reference allows the output voltage to be precisely regulated to low voltage requirement. A fixed 260kHz/ 400kHz oscillator reduce the component size for saving board area. The RT9209/A future a enable control pin to shutdown PWM switching and a 90% power good flag indicator.

Published: Dec 26, 2013 |