X9118 - Dual Supply/Low Power/1024-Tap/2-Wire Bus Single Digitally-Controlled Potentiometer

Features

1024 resistor taps.
10-bit resolution.
2-wire serial interface for write, read and transfer operations of the potentiometer.
Wiper resistance, 40 typical @ 5V.
Four non-volatile data registers for each potentiometer.
Non-volatile storage of multiple wiper positions.
Power on recall: Loads saved wiper position on power-up.
Standby current < 15µA Max.
System VCC: 2.7V to 5.5V operation.
Analog V+/V-: -5V to.

X9118 dual supply/low power/1024-tap/2-wire bus single digitally-controlled potentiometer by Renesas - Datasheet Preview

Datasheet Details

Part number	X9118
Manufacturer	Renesas
File Size	719.66 KB
Description	Dual Supply/Low Power/1024-Tap/2-Wire Bus Single Digitally-Controlled Potentiometer
Datasheet	X9118 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
X9116	Digitally Controlled Potentiometer (XDCP)	Xicor
X9104P	X9104P	ETC

Other Datasheets by Renesas

Part Number	Description
X9110	Single Digitally Potentiometer
X9111	Single Digitally Potentiometer
X9116	Digitally Potentiometer
X9119	Digitally Potentiometer

Full PDF Text Transcription

Click to expand full text

DATASHEET X9118 Dual Supply/Low Power/1024-Tap/2-Wire Bus Single Digitally-Controlled (XDCP™) Potentiometer FN8161 Rev 5.00 April 9, 2014 The X9118 is a single digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digital controlled potentiometer is implemented using 1023 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. The potentiometer has associated with it a volatile Wiper Counter Register (WCR) and a four non-volatile Data Registers that can be directly written to and read by the user.

Published: Apr 17, 2019 |