Datasheet4U Logo Datasheet4U.com

RAA212421 - 1.1A Synchronous Buck Regulator

Description

.

2.

7 2.1 Absolute Maximum Ratings

Features

  • a PFM mode for improved efficiency at light load. This feature can be disabled if forced PWM mode is desired. It can use internal or external compensation, which minimizes the required external components, reduces BOM count and complexity of design. The part switches at a default frequency of 500kHz; however, it can also be programmed using an external resistor from 300kHz to 2MHz. Other features include programmable soft-start, hiccup mode overcurrent protection, thermal shutdown, and power-goo.

📥 Download Datasheet

Datasheet preview – RAA212421

Datasheet Details

Part number RAA212421
Manufacturer Renesas
File Size 1.93 MB
Description 1.1A Synchronous Buck Regulator
Datasheet download datasheet RAA212421 Datasheet
Additional preview pages of the RAA212421 datasheet.

📁 Similar Datasheet

  • RAA28 - Infrared I2C remote control decoder (ETC)
Other Datasheets by Renesas
  • RAA212422 - synchronous buck regulator
  • RAA212831 - 0.5A Buck Regulator
  • RAA212832 - 0.5A Buck Regulator
  • RAA210030 - 3A Step-Down DC/DC Module
  • RAA210040 - 4A Step-Down DC/DC Mini Module
  • RAA210130 - 30A Single Channel Digital PMBus Step-Down Power Module
  • RAA210610 - 15A 54V Single-Channel DC/DC Step-Down Power Module
  • RAA210825 - Pin-Configurable 25A DC/DC Power Module

Full PDF Text Transcription

Click to expand full text
DATASHEET RAA212421 3V to 40V Input, 1.1A Synchronous Buck Regulator with Integrated 500mA LDO FN9309 Rev.3.00 Jul 8, 2019 The RAA212421 is a dual-output regulator combining a 3V to 40V input, 1.1A synchronous buck converter with a 500mA LDO featuring fast transient response. The combination of two high-performance power supplies in one compact 3x6mm package provide an easy-to-use, high-efficiency compact solution. The wide VIN buck regulator of the RAA212421 integrates both high-side and low-side nMOSFETs and features a PFM mode for improved efficiency at light load. This feature can be disabled if forced PWM mode is desired. It can use internal or external compensation, which minimizes the required external components, reduces BOM count and complexity of design.
Published: |