Datasheet4U Logo Datasheet4U.com

R2A20164NP - 8-bit 4ch D/A Converter

Description

The R2A20164 is an integrated circuit semiconductor of CMOS structure with 4 channels of built in D/A unnecessary and enabling configuration of a system with few component parts.

Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD.

Features

  • Guarantee Differential nonlinearity error : +/-0.7LSB, Nonlinearity error : +/-1.0LSB.
  • Data transfer format: 12-bit serial data input type by 3 wire ( DI, SCK, LD ).
  • Output buffer op-amps: Operable over entire voltage range from almost ground to Vcc ( 0 to 5V ).
  • 4 reference voltage terminals ( 2ch  2 composition and completely independent of the power supply terminal).
  • Very small size package line-up: QFN-16 (pin pitch: 0.5mm), TSSOP-16 (pin pitch 0.65mm).

📥 Download Datasheet

Datasheet Details

Part number R2A20164NP
Manufacturer Renesas
File Size 349.40 KB
Description 8-bit 4ch D/A Converter
Datasheet download datasheet R2A20164NP Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
R2A20101BM Monolithic Synchronous Step-Down DC/DC Converter Renesas Technology
R2A20101NP Monolithic Synchronous Step-Down DC/DC Converter Renesas Technology
R2A20111DD Power Factor Correction Controller Renesas Technology
R2A20111SP Power Factor Correction Controller Renesas Technology
R2A20112DD Critical Conduction Mode Interleaved PFC Controller Renesas Technology

Other Datasheets by Renesas

Part Number Description
R2A20164SA 8-bit 4ch D/A Converter
R2A20162NS 8-bit 2ch D/A Converter
R2A20162SA 8-bit 2ch D/A Converter
R2A20162SP 8-bit 2ch D/A Converter
R2A20166NP 8-bit 6ch D/A Converter

Full PDF Text Transcription

Click to expand full text
New Product R2A20164NP/SA 8-bit 4ch D/A Converter with Buffer Amplifiers R03DS0017EJ0100 Rev.1.00 2011.09.05 Description The R2A20164 is an integrated circuit semiconductor of CMOS structure with 4 channels of built in D/A unnecessary and enabling configuration of a system with few component parts. Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making peripheral elements unnecessary and enabling configuration of a system with few component parts. Very small QFN package is added to lineup.
Published: |