Datasheet4U Logo Datasheet4U.com

ISL6140 - Negative Voltage Hot Plug Controller

Features

  • Low Side External NFET Switch.
  • Operates from -10V to -80V (-100V absolute max rating) or +10V to +80V (+100V absolute max rating).
  • Programmable Inrush Current.
  • Programmable Electronic Circuit Breaker (overcurrent shutdown).
  • Progr.

📥 Download Datasheet

Datasheet preview – ISL6140

Datasheet Details

Part number ISL6140
Manufacturer Renesas
File Size 863.55 KB
Description Negative Voltage Hot Plug Controller
Datasheet download datasheet ISL6140 Datasheet
Additional preview pages of the ISL6140 datasheet.

📁 Similar Datasheet

  • ISL6142 - Negative Voltage Hot Plug Controller (Intersil Corporation)
  • ISL6152 - Negative Voltage Hot Plug Controller (Intersil Corporation)
  • ISL6172 - Dual Low Voltage Hot Swap Controller (Intersil Corporation)
  • ISL60007 - High Precision FGA Voltage References (Intersil Corporation)
  • ISL6217 - Precision Multi-Phase Buck PWM Controller (Intersil Corporation)
  • ISL6219 - Microprocessor CORE Voltage Regulator (Intersil Corporation)
  • ISL6226 - Advanced PWM and Linear Power Controller for Portable Applications (Intersil Corporation)
  • ISL6232 - High Efficiency System Power Supply Controller (Intersil Corporation)
  • ISL6235 - Advanced Triple PWM Only Mode and Dual Linear Power Controller (Intersil Corporation)
  • ISL6244 - Multi-Phase PWM Controller (Intersil Corporation)
Other Datasheets by Renesas
  • ISL6141 - Negative Voltage Hot Plug Controller
  • ISL6144 - High Voltage ORing MOSFET Controller
  • ISL6146 - Low Voltage OR-ing FET Controller
  • ISL6111 - Current Regulated PCI Hot Plug Power Switch Controller
  • ISL6112 - Dual Slot PCI-Express Hot Plug Controller
  • ISL6113 - Dual Slot PCI-E Hot Plug Controllers
  • ISL6114 - Dual Slot PCI-E Hot Plug Controllers
  • ISL6115 - Power Distribution Controllers

Full PDF Text Transcription

Click to expand full text
DATASHEET ISL6140, ISL6150 Negative Voltage Hot Plug Controller The ISL6140 is an 8 Ld, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass transistor. The pass transistor is turned off if the input voltage is less than the undervoltage threshold, or greater than the overvoltage threshold. A programmable electronic circuit breaker protects the system against shorts. The active low PWRGD signal can be used to directly enable a power module (with a low enable input) The ISL6150 is the same part, but with an active high PWRGD signal. FN9039 Rev 5.
Published: |