ISL54216 Datasheet PDF (USB 2.0 High-Speed/UART Dual SP3T)

ISL54216 - USB 2.0 High-Speed/UART Dual SP3T

Description

µTQFN TQFN NAME FUNCTION 1 1 3D+ USB3 Differential Input 2 2 2D- USB2 Differential Input 3 3 2D+ USB2 Differential Input 4 4 1D- USB1 Differential Input 5 5 1D+ USB1 Differential Input 6 6 GND Ground Connection 7 7 COM+ Data Common Pin 8 8 COM- Data Common Pin 9 9 C1 Digital Control Inpu

Features

High Speed (480Mbps) and Full Speed (12Mbps) Signaling Capability per USB 2.0 on All Ports.
UART Capability on All Ports.
COM Pins Allow Negative Swings to -2V.
Compatible with Wired-OR Connected GND Referenced Audio Sources.
All Switches Open Mode.
Power OFF Protection.
COM Pins Overvoltage Tolerant to 5.5V.
Low ON Capacitance @ 240MHz 4pF.
-3dB Frequency 800MHz.
Single Supply Operation (VDD)2.7V to 4.6V.

Datasheet Details

Part number	ISL54216
Manufacturer	Renesas
File Size	1.38 MB
Description	USB 2.0 High-Speed/UART Dual SP3T
Datasheet	ISL54216 Datasheet

📁 Similar Datasheet

ISL5100A - Quad 18V Pin Electronics Driver/Window Comparator (Intersil Corporation)

ISL5239 - Pre-Distortion Linearizer (Intersil Corporation)

ISL55112 - High-Speed Dual Precision CCD Driver (Intersil Corporation)

ISL55161 - SOC Dual Channel 400MHz Pin Electronics/DAC/PMU (Elevate)

ISL55162 - SOC Dual Channel 300MHz Pin Electronics/DAC/PMU/Deskew (Elevate)

ISL55163 - SOC Dual Channel 400MHz Pin Electronics/DAC/PMU (Elevate)

ISL55180 - SOC 8-Channel DPS (Elevate)

ISL55185 - SOC Octal Wide Voltage PMU/Load (Elevate)

ISL55187 - SOC Pin Electronics Companion PMU/DAC (Elevate)

ISL55188 - Wide Voltage Pin SOC (Elevate)

Full PDF Text Transcription

Click to expand full text

DATASHEET ISL54216 USB 2.0 High-Speed/UART Dual SP3T (Dual 3 to 1 Multiplexer) FN7701 Rev.1.00 Dec 5, 2018 The ISL54216 is a single supply dual SP3T analog switch that operates from a single supply in the range of 2.7V to 4.6V. It was designed to multiplex between three different differential data sources, allowing the multiplexing of USB 2.0 high speed and/or UART data signals through a common headphone connector in Personal Media Players and other portable battery powered devices. The switch channels have very low ON capacitance and high bandwidth to pass USB high speed signals (480Mbps) with minimal edge and phase distortion and can swing rail-to-rail to pass UART and full-speed USB signals. The ISL54216 is available in a tiny 12 Ld 2.2mmx1.

Published: Jul 23, 2018 |