Datasheet4U Logo Datasheet4U.com

ISL32614E - RS-485/RS-422 Transmitters

Download the ISL32614E datasheet PDF. This datasheet also covers the ISL32613E variant, as both devices belong to the same rs-485/rs-422 transmitters family and are provided as variant models within a single manufacturer datasheet.

Description

Driver input.

A low on DI forces output Y low and output Z high.

Similarly, a high on DI forces output Y high and output Z low.

Features

  • Wide supply voltage range.
  • . . . 1.8V to 3.6V.
  • Low quiescent supply current.
  • . 80µA (max) - Very low shutdown supply current.
  • . 2µA (max).
  • High ESD protection on RS-485 outputs . . . . ±16.5kV HBM - Class 3 ESD level on all other pins.
  • . >8kV HBM.
  • Specified for +125°C.
  • Hot plug - Tx outputs remain three-state during power-up.
  • Low Tx leakage allows >256 device.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ISL32613E-Renesas.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ISL32614E
Manufacturer Renesas
File Size 655.62 KB
Description RS-485/RS-422 Transmitters
Datasheet download datasheet ISL32614E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL3282EMRTEP RS-485/422 Receiver Intersil
ISL3298EMRTEP Low Power RS-485/RS-422 Transmitter Intersil
ISL3084 VCO Intersil Corporation
ISL3090 10GHz Vco Intersil Corporation
ISL3092 11GHz VCO Intersil Corporation

Other Datasheets by Renesas

Part Number Description
ISL32610E RS-485/RS-422 Differential Receivers
ISL32611E RS-485/RS-422 Differential Receivers
ISL32612E RS-485/RS-422 Differential Receivers
ISL32613E RS-485/RS-422 Transmitters
ISL32600E Slew Rate Limited RS-485/RS-422 Transceivers

Full PDF Text Transcription

Click to expand full text
DATASHEET ISL32613E, ISL32614E ±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23, RS-485/RS-422 Transmitters FN7906 Rev 4.00 Feb 14, 2019 The ISL32613E and ISL32614E are ±16.5kV HBM ESD protected (7kV IEC61000 contact), 1.8V powered, single transmitters for differential communication. These drivers have very low bus currents (±40µA), so they present less than a 1/8 unit load to the bus. The low bus currents allow more than 256 transmitters on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Hot plug circuitry ensures that the Tx outputs remain in a high impedance state while the power supply stabilizes.
Published: |