CD22M3494 Datasheet PDF - Renesas BiMOS-E Crosspoint Switch Specs

CD22M3494 - BiMOS-E Crosspoint Switch

Datasheet Summary

Description

40 LD PDIP PIN NO.

44 LD PLCC PIN NO.

44 44 Positive Supply.

Features

128 Analog Switches.
Low rON.
Guaranteed rON Matching.
Analog Signal Input Voltage Equal to the Supply Voltage.
Wide Operating Voltage.
. . . 4V to 15V.
Parallel Input Addressing.
High Latch-Up Current.
. . . 50mA (Min).
Very Low Crosstalk.
Pin and Functionally Compatible with the Following Types: SGS M3494 and Mitel MT8816.
Pb-Free (RoHS Compliant) Appli.

Datasheet Details

Part number	CD22M3494
Manufacturer	Renesas
File Size	900.55 KB
Description	BiMOS-E Crosspoint Switch
Datasheet	CD22M3494 Datasheet
Additional preview pages of the CD22M3494 datasheet.

📁 Similar Datasheet

CD22M3493 - 12 x 8 x 1 BiMOS-E Crosspoint Switch (Intersil Corporation)

CD22100 - CMOS 4 x 4 Crosspoint Switch with Control Memory High-Voltage Type (20V Rating) (Intersil Corporation)

CD22100 - CMOS 4 x 4 Crosspoint Switch (RCA)

CD22101 - CMOS 4 x 4 x 2 Crosspoint Switch with Control Memory (Intersil Corporation)

CD22101 - CMOS 4 x 4 x 2 Crosspoint Switch (RCA)

CD22102 - CMOS 4 x 4 x 2 Crosspoint Switch with Control Memory (Intersil Corporation)

CD22102 - CMOS 4 x 4 x 2 Crosspoint Switch (RCA)

CD22103 - CMOS HDB3 Transcoder (RCA)

CD22103A - CMOS HDB3 High Density Bipolar 3 Transcoder for 2.048/8.448Mb/s Transmission Applications (Intersil Corporation)

CD22104 - CMOS 4-Digit LCD Decoder-Drivers (RCA)

Full PDF Text Transcription

Click to expand full text

CD22M3494 16 x 8 x 1 BiMOS-E Crosspoint Switch The Intersil CD22M3494 is an array of 128 analog switches capable of handling signals from DC to video. Because of the switch structure, input signals may swing through the total supply voltage range, VDD to VEE. Each of the 128 switches may be addressed via the ADDRESS input to the 7 to 128 line decoder. The state of the addressed switch is established by the signal to the DATA input. A low or zero input will open the switch, while a high logic level or a one will result in closure of the addressed switch when the STROBE input goes high from its normally low state. Any number or combination of connections may be active at one time. Each connection, however, must be made or broken individually in the manner previously described.

Published: Jun 3, 2020 |