Datasheet4U Logo Datasheet4U.com

SY02-HP2O - SYNCHRONOUS EQUIPMENT CLOCK REGENERATOR

General Description

The SY02-HP2O is a High Frequency Phase Lock Loop has been designed as a module level subsystem for easy incorporation into telecommunication equipment.

The module generates the high frequency (up to 622.08MHz) output from a low jitter VCXO or VCSO (SAW based oscillators).

Key Features

  • Low jitter output from intrinsically low jitter VCXO or VCSO; One pre-selected input reference of 8kHz to 77.76MHz (CMOS levels); Two pairs of high frequency differential LVPECL outputs up to 800MHz. (must be at the same frequency) Alarms and status; Provides free running clock output; The unit changes timing modes in response to external events; J-TAG service port for re-programming and servicing; 3.3V DC power supply Small dimensions: 0.75” x 1.20” SMT pkg.
  • -.

📥 Download Datasheet

Datasheet Details

Part number SY02-HP2O
Manufacturer Raltron Electronics
File Size 169.96 KB
Description SYNCHRONOUS EQUIPMENT CLOCK REGENERATOR
Datasheet download datasheet SY02-HP2O Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SYNCHRONOUS EQUIPMENT LOW INPUT/ HIGH DUAL OUTPUT FREQUENCY CLOCK/SYNCHRONIZER SY02-HP2O SY02-HP2O Date: January 20, 2004 • INTRODUCTION The SY02-HP2O is a high frequency crystal-based PLL synchronizer designed as a module level subsystem for easy incorporation into telecommunication equipment. • - FEATURES Low jitter output from intrinsically low jitter VCXO or VCSO; One pre-selected input reference of 8kHz to 77.76MHz (CMOS levels); Two pairs of high frequency differential LVPECL outputs up to 800MHz. (must be at the same frequency) Alarms and status; Provides free running clock output; The unit changes timing modes in response to external events; J-TAG service port for re-programming and servicing; 3.3V DC power supply Small dimensions: 0.75” x 1.20” SMT pkg.