Datasheet4U Logo Datasheet4U.com

BD16933EFV-C - Automotive 3ch Half Bridge Driver

General Description

The BD16933EFV-C is 3ch half bridge driver for automotive applications.

It can drive compact DC brush motors directly and each output can be controlled in three modes (High, Low and High Impedance).

MCU can control the driver via 16bit Serial Interface (SPI).

Key Features

  • AEC-Q100 Qualified(Note 1).
  • 1.0A DMOS Half Bridge 3 Circuits.
  • Three Mode Output Control (High, Low & High Impedance).
  • Low Standby Current.
  • Built-in Protection Diode Against Output Reverse Voltage.
  • Over Current Detection(OCD).
  • Under Load Detection(ULD).
  • Over Voltage Protection at Output Power Supply Stage(OVP).
  • Under Voltage Lock Out at Output Power Supply Stage(UVLO).
  • Thermal Shut.

📥 Download Datasheet

Datasheet Details

Part number BD16933EFV-C
Manufacturer ROHM
File Size 1.10 MB
Description Automotive 3ch Half Bridge Driver
Datasheet download datasheet BD16933EFV-C Datasheet

Other Datasheets by ROHM

Part Number Description
BD16912EFV-C 40V/3A Rating H Bridge Driver
BD16922EFV-M H-bridge Drivers
BD16950EFV-C 2ch Half-Bridge Gate Driver
BD16952EFV-M 2ch Half-Bridge Gate Driver
BD16805FV-M Three Phase Motor Predriver
BD1020HFV Temperature Sensor
BD10KA5FP Low ESR Capacitor
BD10KA5FP-E2 500mA Variable/Fixed Output LDO Regulators
BD10KA5WF Low ESR Capacitor
BD10KA5WF-E2 500mA Variable/Fixed Output LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Motor / Actuator Drivers for DC Brush Motor Series Automotive 3ch Half Bridge Driver with SPI Control BD16933EFV-C General Description The BD16933EFV-C is 3ch half bridge driver for automotive applications. It can drive compact DC brush motors directly and each output can be controlled in three modes (High, Low and High Impedance). MCU can control the driver via 16bit Serial Interface (SPI). The part is 60V rated with low ON resistance packaged in compact HTSSOP-20 package, which contributes to realize high reliability, low energy consumption and low cost. Features ■ AEC-Q100 Qualified(Note 1) ■ 1.