Datasheet4U Logo Datasheet4U.com

R1126N - LOW NOISE 150mA LDO REGULATOR

Description

Pin No.

Features

  • Low Supply Current Typ. 10µA Standby Current Typ. 0.1µA Input Voltage Range 1.8V to 6.0V Output Voltage Range 1.5V to 4.0V Low Dropout Voltage Typ. 0.29V (IOUT=150mA,VOUT=2.8V) High Ripple Rejection Typ. 70dB (f=1kHz, VOUT=3.0V) Typ. 53dB (f=10kHz) High Output Voltage Accuracy ±1.5% (1.5V < = VOUT < = 3.0V), ±2.0% (VOUT>3.0V) Low Temperature-Drift Coefficient of Output Vol.

📥 Download Datasheet

Datasheet Details

Part number R1126N
Manufacturer RICOH
File Size 675.82 KB
Description LOW NOISE 150mA LDO REGULATOR
Datasheet download datasheet R1126N Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
R1120-G 16-BIT RISC MICRO-CONTROLLER RDC
R1124N Low Noise 150mA LDO Regulator Ricoh Corporation
R1124NC14K Distributed Gate Thyristor IXYS
R1124NC14L Distributed Gate Thyristor IXYS
R1124NC14M Distributed Gate Thyristor IXYS

Other Datasheets by RICOH

Part Number Description
R1120N301A LOW NOISE 150mA L.D.O REGULATOR
R1120N301B LOW NOISE 150mA L.D.O REGULATOR
R1120N401A LOW NOISE 150mA L.D.O REGULATOR
R1120N401B LOW NOISE 150mA L.D.O REGULATOR
R1120N501A LOW NOISE 150mA L.D.O REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com R1126N SERIES LOW NOISE 150mA LDO REGULATOR NO. EA-130-0512 OUTLINE The R1126N Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low on Resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a short current limit circuit, a chip enable circuit, and so on. These ICs perform with low dropout voltage and the chip-enable function. The supply current at no load of this IC is only 10µA, and the line transient response and the load transient response of the R1126N Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.
Published: |