Datasheet4U Logo Datasheet4U.com

RP1365 - 4 Channels 100mA x1/x1.5/x2 Charge Pump White LED Driver

Description

The RP1365 is a 4 channel WLED driver with auto mode selection of x1, x1.5 and x2 mode with low dropout voltage in current sources.

The RP1365 can power up to 4 white LEDs with regulated constant current for uniform intensity.

Each channel (LED1 to LED4) can support up to 25mA.

Features

  • Efficiency Up to 93% Over Li-ion Battery Discharge Typical 85% Average Efficiency Over Li-ion Battery Discharge Support Up to 4 White LEDs Support Up to 25mA/Per Channel Support Up to 100mA Output Current PWM Brightness Control 60mV Typical Current Source Dropout 1% Typical LED Current Accuracy 0.7% Typical LED Current Matching Automatic x1/x1.5/x2 Charge Pump Mode Transition Low Input Noise and EMI Charge Pump 5V Over Voltage Protection Power On/Mode Transition In-rush Protection 1MHz Switching.

📥 Download Datasheet

Datasheet Details

Part number RP1365
Manufacturer RICHPOWER
File Size 265.01 KB
Description 4 Channels 100mA x1/x1.5/x2 Charge Pump White LED Driver
Datasheet download datasheet RP1365 Datasheet

📁 Similar Datasheet

Other Datasheets by RICHPOWER
  • RP1364A - 4 Channels 100mA x1/x1.5/x2 Charge Pump White LED Driver
  • RP1366 - 120mA 6-Channel Charge Pump White LED Driver
  • RP1202 - Ultra-Fast CMOS LDO Regulator
  • RP1207 - Ultra-Fast CMOS LDO Regulator
  • RP1208 - Ultra-Fast CMOS LDO Regulator
  • RP1210 - 1.8A Sink/Source Bus Termination Regulator
  • RP1215 - 600mA Adjustable Output Voltage CMOS LDO Regulator
  • RP1222 - 300mA Adjustable Output Voltage CMOS LDO Regulator

Full PDF Text Transcription

Click to expand full text
Preliminary RP1365 4 Channels 100mA x1/x1.5/x2 Charge Pump White LED Driver General Description The RP1365 is a 4 channel WLED driver with auto mode selection of x1, x1.5 and x2 mode with low dropout voltage in current sources. The RP1365 can power up to 4 white LEDs with regulated constant current for uniform intensity. Each channel (LED1 to LED4) can support up to 25mA. The part maintains highest efficiency by utilizing x1/x1.5/ x2 fractional charge pump and low dropout current regulators. For the brightness control, user can easily use a PWM signal generated from GPIO to control the brightness of WLEDs. The RP1365 is available in a WQFN-16L 3x3 package. Small 0.22uF capacitors can be used for fly capacitors.
Published: |