Datasheet4U Logo Datasheet4U.com

RF9908PCBA - CDMA/FM UPCONVERTER/BPSK MODULATOR

Description

The RF9908 is a complete upconverter designed for CDMA/FM cellular applications.

The IC contains a double-balanced mixer stage and an output buffer amplifier stage.

This device may also be used to directly BPSK modulate a carrier.

Features

  • Supports Dual Mode Operation.
  • +8dBm Input/Output Intercept Point.
  • Single 3.6V Power Supply.
  • Internally Matched Inputs and Outputs.
  • Buffered Output.
  • Double-Balanced Mixer IF+ 1 IF- 2 GND 3 LO+ 4 8 RF OUT 7 VCC 6 GND 5 LO- Ordering Information RF9908 RF9908 PCBA CDMA/FM Upconverter/BPSK Modulator Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 12.

📥 Download Datasheet

Datasheet Details

Part number RF9908PCBA
Manufacturer RF Micro Devices
File Size 50.69 KB
Description CDMA/FM UPCONVERTER/BPSK MODULATOR
Datasheet download datasheet RF9908PCBA Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF900DV 900Mhz RF Module 16-Channel Laipac
RF92 (RF92 / RF93) 860 MHz to 1020 MHz Low Power Long Range Transceiver HOPERF
RF93 (RF92 / RF93) 860 MHz to 1020 MHz Low Power Long Range Transceiver HOPERF
RF96 (RF96 - RF98) 137 MHz to 1020 MHz Low Power Long Range Transceiver HOPERF
RF97 (RF96 - RF98) 137 MHz to 1020 MHz Low Power Long Range Transceiver HOPERF

Other Datasheets by RF Micro Devices

Part Number Description
RF9908 CDMA/FM UPCONVERTER/BPSK MODULATOR
RF9906 CDMA / FM Low Noise Amplifier / Mixer
RF9938 PCS UPCONVERTER/BPSK MODULATOR
RF9938PCBA PCS UPCONVERTER/BPSK MODULATOR
RF9957 CDMA/FM RECEIVE AGC AND DEMODULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RF9908 6 Typical Applications • CDMA/FM Cellular Systems • Supports Dual-Mode AMPS/CDMA • Supports Dual-Mode TACS/CDMA • Commercial and Consumer Systems • 3-Cell Battery-Operated Systems CDMA/FM UPCONVERTER/BPSK MODULATOR Product Description The RF9908 is a complete upconverter designed for CDMA/FM cellular applications. The IC contains a double-balanced mixer stage and an output buffer amplifier stage. This device may also be used to directly BPSK modulate a carrier. The mixer is a Gilbert cell with emitter degeneration resistors to provide high IP3. The output stage is a class-B, push-pull configuration to reduce the overall current and still provide a good 50 Ω output match. The unit operates at 3.6V and does not require any external matching components other than coupling capacitors.
Published: |