Datasheet4U Logo Datasheet4U.com

RF3330PCBA - IF GAIN CONTROLLED AMPLIFIER

Description

TEXT

Caution!

ESD sensitive device.

Features

  • Single 5V Positive Power Supply.
  • 26dB Gain Range.
  • 150MHz Bandwidth VCC 1 GND 2 VOUT 3 VOUTB 4 Biasing & AGC Control 8 VCC 7 VIN 6 VINB 5 VAGC.
  • Compact Package Ordering Information RF3330 RF3330 PCBA RF3330 PCBA IF Gain Controlled Amplifier Fully Assembled Evaluation Board - 75 Ω Fully Assembled Evaluation Board - 50 Ω Tel (336) 664 1233 Fax (336) 664 0454 http://www. rfmd. com Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro.

📥 Download Datasheet

Datasheet preview – RF3330PCBA

Datasheet Details

Part number RF3330PCBA
Manufacturer RF Micro Devices
File Size 143.33 KB
Description IF GAIN CONTROLLED AMPLIFIER
Datasheet download datasheet RF3330PCBA Datasheet
Additional preview pages of the RF3330PCBA datasheet.

📁 Similar Datasheet

  • RF3336 - SAW Filter (RF Monolithics)
  • RF3336C - SAW Filter (RF Monolithics)
  • RF3336D - SAW Filter (RF Monolithics)
  • RF3336E - SAW Filter (RF Monolithics)
  • RF3319D - SAW Filter (RF Monolithics)
  • RF3319E - SAW Filter (RF Monolithics)
  • RF3355C - SAW Filter (RF Monolithics)
  • RF3356 - NPN RF Transistor (MCC)
  • RF3358 - NPN RF Transistor (MCC)
  • RF3391D - SAW Filter (RF Monolithics)
Other Datasheets by RF Micro Devices
  • RF3330 - IF GAIN CONTROLLED AMPLIFIER
  • RF3334 - IF LOW NOISE AMPLIFIER/MIXER
  • RF3300-2 - LINEAR AMPLIFIER MODULE
  • RF3300-3 - LINEAR AMPLIFIER MODULE
  • RF3315 - ROADBAND HIGH LINEARITY AMPLIFIER
  • RF3320 - CABLE REVERSE PATH PROGRAMMABLE GAIN AMPLIFIER
  • RF3320PCBA - CABLE REVERSE PATH PROGRAMMABLE GAIN AMPLIFIER
  • RF3321 - REVERSE PATH HIGH OUTPUT POWER PROGRAMMABLE GAIN AMPLIFIER

Full PDF Text Transcription

Click to expand full text
Preliminary 3 Typical Applications • CATV Set-Top Boxes • Cable Modems • Cable-Ready TVs RF3330 IF GAIN CONTROLLED AMPLIFIER 3 1.59 1.61 0.365 0.15 0.05 The RF3330 is a gain-controlled amplifier suitable for application in the IF receive section of a cable tuner. It consists of a high impedance differential input stage, a low impedance differential output stage, and a differential gain-controlled amplifier. The voltage gain may be varied by applying an analog control voltage. The device is fabricated on an advanced Bi-CMOS process, and is housed in an eight-lead SOT23 package. 2.80 3.00 0.650 2.60 3.00 3°MAX 0°MIN 1.44 1.04 0.127 *When Pin 1 is in upper left, text reads downward (as shown). 0.35 0.
Published: |