Datasheet4U Logo Datasheet4U.com

RF2461 - CDMA/FM LOW NOISE AMPLIFIER/MIXER 900MHZ DOWNCONVERTER

General Description

The RF2461 is a receiver front-end designed for the receive section of dual-mode CDMA/FM cellular applications.

It is designed to amplify and downconvert RF signals, while providing 30dB of stepped gain control range.

Key Features

  • include digital control of LNA gain, mixer gain, and power down mode. Another feature of the chip is adjustable IIP3 of the LNA and mixer using an off-chip current setting resistor. Noise figure, IP3, and other specs are designed to be compatible with the IS-98B interim standard for CDMA cellular communications. The IC is manufactured on an advanced Silicon Germanium HBT process and is in a 4mmx4mm, 20-pin, leadless chip carrier. 1.00 0.90 0.60 0.24 typ 4.00 sq. 4 PLCS 0.65 0.30 3 0.20 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF2001 SAW Filter REYCONNS
RF2001 Fast recovery Diodes Rohm
RF2001NS2D Super Fast Recovery Diode ROHM
RF2001NS2DFH Super Fast Recovery Diode ROHM
RF2001NS3D Fast Recovery Diodes Rohm

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RF2460 PCS CDMA LOW NOISE AMPLIFIER/MIXER 1500MHZ TO 2200MHZ DOWNCONVERTER
RF2464 VHF Quadrature Modulator
RF2466 3V CDMA/FM MIXER
RF2469 W-CDMA AND PCS LOW NOISE AMPLIFIER/MIXER DOWNCONVERTER
RF2401 Low Noise Amplifier / Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary RF2461 CDMA/FM LOW NOISE AMPLIFIER/MIXER 900MHZ DOWNCONVERTER 8 Typical Applications • CDMA/FM Cellular Systems • Supports Dual-Mode AMPS/CDMA • Supports Dual-Mode TACS/JCDMA • General Purpose Downconverter • Commercial and Consumer Systems • Portable Battery-Powered Equipment Product Description The RF2461 is a receiver front-end designed for the receive section of dual-mode CDMA/FM cellular applications. It is designed to amplify and downconvert RF signals, while providing 30dB of stepped gain control range. Features include digital control of LNA gain, mixer gain, and power down mode. Another feature of the chip is adjustable IIP3 of the LNA and mixer using an off-chip current setting resistor.