Datasheet4U Logo Datasheet4U.com

RF2368 - DCS/PCS 2.7V LOW NOISE AMPLIFIER

General Description

The RF2368 is a DCS/PCS low noise amplifier with bypass switch designed for use as a front-end for DCS1800/PCS1900 applications.

The LNA is a two-stage amplifier with bypass switch.

This amplifier has low noise figure and high linearity in both high gain and bypass/low gain mode.

Key Features

  • Low Noise and High Intercept Point.
  • Power Down Control.
  • Switchable Gain BIAS 1 GND 2 IN 3 GND1 4 Control Logic 8 SELECT 7 OUT 6 GND2 5 VCC Ordering Information RF2368 RF2368 PCBA DCS/PCS 2.7V Low Noise Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www. rfmd. com Rev A0 010503 4-199.

📥 Download Datasheet

Full PDF Text Transcription for RF2368 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for RF2368. For precise diagrams, and layout, please refer to the original PDF.

Preliminary RF2368 DCS/PCS 2.7V LOW NOISE AMPLIFIER 4 Typical Applications • DCS Handsets • PCS Handsets • General Purpose Amplification • Commercial and Consumer Systems...

View more extracted text
sets • General Purpose Amplification • Commercial and Consumer Systems Product Description The RF2368 is a DCS/PCS low noise amplifier with bypass switch designed for use as a front-end for DCS1800/PCS1900 applications. The LNA is a two-stage amplifier with bypass switch. This amplifier has low noise figure and high linearity in both high gain and bypass/low gain mode. 0.365 2.80 3.00 0.650 2.60 3.00 3°MAX 0°MIN 1.44 1.04 0.127 *When Pin 1 is in upper left, text reads downward (as shown). 0.35 0.