Datasheet4U Logo Datasheet4U.com

RF2104 - MEDIUM POWER AMPLIFIER

Description

The RF2104 is a medium power amplifier IC.

The device is manufactured on a low cost Silicon process, and has been designed for use as the final RF amplifier in UHF radio transmitters operating between 400MHz and 1000MHz.

It may also be used as a driver amplifier in higher power applications.

Features

  • 400MHz to 1000MHz Operation.
  • Up to 500mW CW Output Power.
  • 26dB Small Signal Gain.
  • 40dB Gain Control Range.
  • Single 2.7V to 3.6V Supply.
  • 40% Efficiency VCC1 1 GND 2 GND 3 VCC2 4 RF IN 5 GND 6 GND 7 PC 8 16 GND 15 GND 14 GND 13 RF OUT 12 RF OUT 11 GND 10 GND 9 GND BIAS Ordering Information RF2104 Medium Power Amplifier RF2104 PCBA-L Fully Assembled Evaluation Board (830MHz) RF2104 PCBA-H Fully Assembled Evaluation Board (915MHz) RF Micro De.

📥 Download Datasheet

Datasheet Details

Part number RF2104
Manufacturer RF Micro Devices
File Size 112.62 KB
Description MEDIUM POWER AMPLIFIER
Datasheet download datasheet RF2104 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF210A (RF210A / RF210B) Image-Reject Downconverters Conexant Systems
RF210B (RF210A / RF210B) Image-Reject Downconverters Conexant Systems
RF2001 SAW Filter REYCONNS
RF2001 Fast recovery Diodes Rohm
RF2001NS2D Super Fast Recovery Diode ROHM

Other Datasheets by RF Micro Devices

Part Number Description
RF2103P MEDIUM POWER LINEAR AMPLIFIER
RF2105L HIGH POWER LINEAR UHF AMPLIFIER
RF2114 MEDIUM POWER LINEAR AMPLIFIER
RF2115 HIGH POWER UHF AMPLIFIER
RF2115L HIGH POWER UHF AMPLIFIER

Full PDF Text Transcription

Click to expand full text
RF2104 2 Typical Applications • 900MHz ISM Band Applications • 400MHz Industrial Radios • Driver for Higher Power Applications • Portable Battery-Powered Equipment • Commercial and Consumer Systems • Base Station Equipment MEDIUM POWER AMPLIFIER 2 POWER AMPLIFIERS Product Description The RF2104 is a medium power amplifier IC. The device is manufactured on a low cost Silicon process, and has been designed for use as the final RF amplifier in UHF radio transmitters operating between 400MHz and 1000MHz. It may also be used as a driver amplifier in higher power applications. The device is packaged in a plastic quad-batwing 16-lead package, and is self-contained with the exception of the output matching network, power supply feed line, and bypass capacitors.
Published: |