RE46C102
Description
The RE46C102 is a dual H-bridge driver with 35m A drive current and 16V VBB maximum driver supply voltage. A separate low-side driver ground connection, Vss, is provided for current monitoring of each H-bridge driver. Each driver has two control inputs: ENABLE which enables the high-side drivers and therefore connects the driver supply to the motor output. This input can be used for pulse-width modulation. PHASE which is used to reverse the motor polarity. All control inputs are CMOS and TTL patible and the logic section operates at Vdd=5V.
Features
- -
- -
- Typical Quiescent Current < 1u A Output Current of 35m A Output Voltage to 16V Internal Clamp Diodes Available in Standard Packaging or Ro HS pliant Pb free packaging
Pin Configuration
16 Lead Plastic DIP
VBB ENABLEA PHASEA GND GND OUT1A OUT2A VSSA
VDD ENABLEB PHASEB GND GND OUT1B OUT2B VSSB
Absolute maximum ratings
Supply Voltage Vdd ………………………………… -.5V to +17V Output Supply Voltage...
