Datasheet4U Logo Datasheet4U.com

QT220 - 2 KEY QTOUCH SENSOR IC

Description

Sense pin (to Rs1+ Cs1) Sense pin (to Cs1 electrode) Do not connect Speed option Do not connect Output, key 1 Output, key 2 Ground Sync in and/or spread spectrum drive Unbonded internally Unbonded internally Do not connect Reset pin, active low.

Can usually tie to Vdd.

Features

  • spread-spectrum acquisition capability, external synchronization of acquire bursts, and fast and slow acquisition modes. These modes are enabled via high-value resistors connected to the SNS pins to ground or Vdd. These resistors are required in every circuit. There are two basic modes as shown in Figures 1-1 and 1-2. Low-power Sync mode: In this mode the device operates with about a 100ms response time and very low current (about 90µA average at 4.0V). This mode allows the device to be synchron.

📥 Download Datasheet

Datasheet Details

Part number QT220
Manufacturer QUANTUM
File Size 351.90 KB
Description 2 KEY QTOUCH SENSOR IC
Datasheet download datasheet QT220 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
QT2020 10 Gb/s Ethernet PHY Transceiver Chip Quake Technologies
QT2021 10 Gb/s Ethernet And Fibre Channel PHY Transceiver Chip Quake Technologies
QT24A01 10/100/1000 Base-T Single Port Transformer Module TNK
QT24A03 1000 Base-T Single Port Transformer Module TNK
QT24A12 10/100/1000Base-T Single Port Transformer Module TNK

Other Datasheets by QUANTUM

Part Number Description
QT240 4 KEY QTOUCH SENSOR IC
QT240-ISSG 4 KEY QTOUCH SENSOR IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com lQ z Two independent charge-transfer (‘QT’) touch keys z Individual outputs per channel - active high z Projects prox fields through any dielectric z Sensitivity easily adjusted on a per-channel basis z 100% autocal for life - no adjustments required z 3.9V ~ 5.5V single supply operation z 10s, 60s, infinite auto-recal timeout (strap options) z Sync pin for line sync to suppress noise z Spread spectrum operation z Pin options for auto recalibration timings z Extremely low cost per key z 20-SSOP Pb-free package SNS1A SNS1K n.c. SPEED n.c. OUT1 OUT2 VSS SYNC/SS n.c. 1 2 3 4 QT220 5 20-SSOP 6 7 8 9 10 15 14 13 12 11 16 20 19 18 17 QT220 2 KEY QTOUCH™ SENSOR IC SNS2K/OPT1 SNS2A OPT2 n.c. n.c. OSC VDD /RES n.c. n.c.
Published: |