Datasheet4U Logo Datasheet4U.com

SA576N - Low power compandor

Description

The SA576 is a unity gain level programmable compandor designed for low power applications.

The SA576 is internally configured as an expandor and a compressor to minimize external component count.

The SA576 can operate at 1.8V.

Features

  • Operating voltage range: 1.8V to 7V.
  • Low power consumption (1.4mA @ 3.6V) Figure 1. Pin Configuration.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA571 Compandor ON Semiconductor
SA572 Programmable Analog Compandor ON Semiconductor
SA575 Low Voltage Compandor ON Semiconductor
SA57A Switching Amplifier APEX
SA5 SURFACE MOUNT SILICON RECTIFIER Rectron

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
SA576 Low power compandor
SA57608 One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection
SA57608XD One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection
SA576D Low power compandor
SA57000-25D Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS SA576 Low power compandor Product specification IC17 Data Handbook 1997 Aug 14 Philips Semiconductors Philips Semiconductors Product specification Low power compandor SA576 DESCRIPTION The SA576 is a unity gain level programmable compandor designed for low power applications. The SA576 is internally configured as an expandor and a compressor to minimize external component count. The SA576 can operate at 1.8V. During normal operations, the SA576 can operate from at least a 2V battery. If the battery voltage drops to 1.8V, this part will still continue to function, however, turning on the part at a VCC of 1.8V requires two external resistors to bring VREF to half VCC. One resistor connects between VCC and VREF; the other connects from VREF to ground.
Published: |