Datasheet4U Logo Datasheet4U.com

SA5222 - Low-power FDDI transimpedance amplifier

Description

The NE/SA5222 is a low-power, wide-band, low noise transimpedance amplifier with differential outputs, optimized for signal recovery in FDDI fiber optic receivers.

The part is also suited for many other RF and fiber optic applications as a general purpose gain block.

Features

  • Single 5V supply.
  • Low supply current: 9mA.
  • Large bandwidth: 165MHz.
  • Differential outputs.
  • Low output offset.
  • Low input/output impedances.
  • High power-supply-rejection ratio: 55dB.
  • Tight transresistance control.
  • High input overload: 115µA.
  • ESD protected Ǹ Extremely low noise: 2.0pAń Hz IN GND1 SD00360 Figure 1. Pin Configuration.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA52 13.2MM SINGLE DIGIT NUMERIC DISPLAYS ETC
SA52-11 13.2 MM SIGNLE DIGIT NUMERIC DISPLAYS ETC
SA52-11 SINGLE DIGIT NUMERIC DISPLAYS Kingbright Electronic
SA52-11EWA 13.2MM SINGLE DIGIT NUMERIC DISPLAYS ETC
SA52-11EWA (SA52-11xxx) Sidplay - 13 mm Kingbright Electronic

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
SA5223 Wide dynamic range AGC transimpedance amplifier 150MHz
SA5224 FDDI fiber optic postamplifier
SA5225 Fiber optic postamplifier
SA5200 RF dual gain-stage
SA5204 Wide-band high-frequency amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Philips Semiconductors Product specification Low-power FDDI transimpedance amplifier SA5222 DESCRIPTION The NE/SA5222 is a low-power, wide-band, low noise transimpedance amplifier with differential outputs, optimized for signal recovery in FDDI fiber optic receivers. The part is also suited for many other RF and fiber optic applications as a general purpose gain block. PIN DESCRIPTION D Package VCC1 GND1 1 2 3 4 8 7 6 5 VCC2 OUT OUT GND2 FEATURES • • Single 5V supply • Low supply current: 9mA • Large bandwidth: 165MHz • Differential outputs • Low output offset • Low input/output impedances • High power-supply-rejection ratio: 55dB • Tight transresistance control • High input overload: 115µA • ESD protected Ǹ Extremely low noise: 2.0pAń Hz IN GND1 SD00360 Figure 1.
Published: |