Datasheet4U Logo Datasheet4U.com

PI3EQX6741ST - SATA Gen 3i ReDriver

Datasheet Summary

Description

Pericom’s PI3EQX6741ST is a low power, signal SATA Gen 3i 6Gbps ReDriver™.

The device provides programmable equalization and output emphasis, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference.

Features

  • ÎÎSupports SATA Gen 3i. ÎÎTwo 6Gbps differential signal pairs ÎÎ100Ω Differential CML I/O’s ÎÎInput signal level detect and squelch for each channel ÎÎOOB Support ÎÎAutomatic HDD Rate detection for output swing/emphasis setting ÎÎTermination detect indication àà Power saving mode control to Host or HDD ÎÎAdjustable Receiver Equalization ÎÎSelectable Output Pre-emphasis and Swing Control ÎÎHigh impedance I/O termination in standby mode ÎÎESD +/-8kV ÎÎLow Power Operation: 254mW typical ÎÎAuto-Slum.

📥 Download Datasheet

Datasheet preview – PI3EQX6741ST

Datasheet Details

Part number PI3EQX6741ST
Manufacturer Pericom Semiconductor Corporation
File Size 561.03 KB
Description SATA Gen 3i ReDriver
Datasheet download datasheet PI3EQX6741ST Datasheet
Additional preview pages of the PI3EQX6741ST datasheet.

📁 Similar Datasheet

  • PI3EQX1001 - 1-Channel USB3.1 GEN-2 ReDriver (Diodes)
  • PI3EQX10312 - USB 3.1 Mux/Demux ReDriver (Diodes)
  • PI3EQX10612 - USB 3.1 Mux/Demux ReDriver (Diodes)
  • PI3EQX1204-C - 12.5Gbps 4-channel SAS3 ReDriver (Diodes)
  • PI3EQX2024 - USB 3.2 Gen 2x2 ReDriver (DIODES)
  • PI3EQXDP1201 - 3.3V 4-Ch DisplayPort 1.2 Redriver (Pericom Semiconductor)
  • PI3012A - 300DPI CIS Sensor Chip (AMI SEMICONDUCTOR)
  • PI3033B - Contact Image Sensor (AMI SEMICONDUCTOR)
  • PI3034A - 200DPI CIS Sensor Chip (AMI SEMICONDUCTOR)
  • PI3039 - 600DPI CIS Image Sensor Chip (AMI SEMICONDUCTOR)
Other Datasheets by Pericom Semiconductor Corporation

Full PDF Text Transcription

Click to expand full text
PI3EQX6741ST 3.3V, 1-port, SATA Gen 3i ReDriver™ with Adjustable Equalization/Pre-Emphasis Features ÎÎSupports SATA Gen 3i. ÎÎTwo 6Gbps differential signal pairs ÎÎ100Ω Differential CML I/O’s ÎÎInput signal level detect and squelch for each channel ÎÎOOB Support ÎÎAutomatic HDD Rate detection for output swing/emphasis setting ÎÎTermination detect indication àà Power saving mode control to Host or HDD ÎÎAdjustable Receiver Equalization ÎÎSelectable Output Pre-emphasis and Swing Control ÎÎHigh impedance I/O termination in standby mode ÎÎESD +/-8kV ÎÎLow Power Operation: 254mW typical ÎÎAuto-Slumber Mode: 36mW typical ÎÎHDD unplugged: 3.6mW ÎÎPower down Stand-by Mode: 0.7mW max ÎÎSupply Voltage: 3.
Published: |