PT5620 Datasheet PDF - PTC 100V Single-Phase Gate Driver Specs

PT5620 - 100V Single-Phase Gate Driver

Datasheet Summary

Description

The PT5620 is a high-speed 100V single-phase gate driver for power MOSFET and IGBT devices with independent high and low side referenced output channels.

Built-in dead time protection prevent damage to the half-bridge.

Features

Integrated 100V half-bridge high side driver.
Built-in dead time protection.
Under voltage lockout for VCC and VBS.
Low operation voltage 5.5V for VCC and VBS.
3.3V and 5V input logic compatible.
Enable pin (EN) for low standby current.
IO+/IO-: +1.5A/.
2.5A at VCC=15V, VBS=15V.
Dead time adjustment by RDT pin.
Common-mode dV/dt noise cancellation circuit.
Tolerant of negative transient voltage.
40ºC to 125ºC operating range.

Datasheet Details

Part number	PT5620
Manufacturer	PTC
File Size	1.06 MB
Description	100V Single-Phase Gate Driver
Datasheet	PT5620 Datasheet
Additional preview pages of the PT5620 datasheet.

📁 Similar Datasheet

PT500 - DC-DC transformer module 500W (DENSEI-LAMBDA)

PT500-48 - DC-DC transformer module 500W (DENSEI-LAMBDA)

PT500-66 - DC-DC transformer module 500W (DENSEI-LAMBDA)

PT501 - TO-18 Type Narrow Acceptance Phototransistor (Sharp Electrionic Components)

PT502J2 - Leaded Thermistors (Littelfuse)

PT503J2 - Leaded Thermistors (Littelfuse)

PT503R2 - Leaded Thermistors (Littelfuse)

PT50S16 - Diode (Nihon Inter Electronics)

PT50S8 - Diode (Nihon Inter Electronics)

PT50SN16 - Diode (Nihon Inter Electronics)

Full PDF Text Transcription

Click to expand full text

Preliminary PT5620 100V Half Bridge Gate Driver DESCRIPTION The PT5620 is a high-speed 100V single-phase gate driver for power MOSFET and IGBT devices with independent high and low side referenced output channels. Built-in dead time protection prevent damage to the half-bridge. The UVLO circuits prevent malfunction when VCC and VBS are lower than the specified threshold voltage. A novel high-voltage BCD process and common-mode noise canceling technique provide stable operation of high-side drivers under high dV/dt noise conditions while achieving excellent negative transient voltage tolerance. An enable pin (EN) is included so that standby mode may be used to set the chip into a low quiescent current state to realize long battery lifetime.

Published: Apr 9, 2025 |