Datasheet4U Logo Datasheet4U.com

RS2111 - Primary-Side Regulation PWM Power Switch

General Description

RS2111/RS2112 is an offline PWM Power switch for low power AC/DC charger and adaptor applications.

It operates in primary-side sensing and regulation.

Consequently, opto-coupler and TL431 could be eliminated from design.

Key Features

  • including Cycle-by-Cycle current limiting, VDD over-voltage clamp and UVLO, fail-safe protection for open loop fault condition. Excellent EMI performance is achieved with Orister proprietary frequency Jiggling technique together with soft switching control at the totem pole gate drive output with No-Y Cap design. Features.
  • Primary-side Sensing and Regulation With No 431 and Opto-coupler.
  • Multi-mode operation for High Efficiency.
  • Programmable CV and CC Regulation.
  • Adjustable.

📥 Download Datasheet

Datasheet Details

Part number RS2111
Manufacturer Orister
File Size 286.93 KB
Description Primary-Side Regulation PWM Power Switch
Datasheet download datasheet RS2111 Datasheet

Other Datasheets by Orister

Part Number Description
RS2112 Primary-Side Regulation PWM Power Switch
RS2042 Green-Power PWM Controller
RS2051 Novel Low Cost Green-Mode PWM Controller
RS2201 Switching Power Supply Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Page No. : 1/9 RS2111/RS2112 Primary-Side Regulation PWM Power Switch Description RS2111/RS2112 is an offline PWM Power switch for low power AC/DC charger and adaptor applications. It operates in primary-side sensing and regulation. Consequently, opto-coupler and TL431 could be eliminated from design. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below. V0 8-Lead Plastic DIP-8 Package Code: P  8-Lead Plastic SOP-8 Package Code: S I0 Fig1. Typical CC/CV Curve In CC control, the current and output power setting can be adjusted externally by the sense resistor Rs at CS pin. In CV control, multi-mode operations are utilized to achieve high performance and high efficiency.