OCP8108A - One-Channel High Power LED Controller

Orient Chip

General Description

The OCP8108A is a high power LED driver, non-synchronous boost controller.

Ideal for use, the OCP8108A can powered the LED backlight in LCD panels.

Key Features

Wide Supply Voltage Range: 10.0V ~ 25.0V.
For Boost, SEPIC, LED Driver.

📥 Download Datasheet

OCP8108A one-channel high power led controller by Orient Chip - Datasheet Preview

Datasheet Details

Part number	OCP8108A
Manufacturer	Orient Chip
File Size	244.86 KB
Description	One-Channel High Power LED Controller
Datasheet	OCP8108A Datasheet

More Datasheets from Orient Chip

Part Number	Description
OCP8107	One-Channel High Power LED Controller
OCP8109A	One-Channel High Power LED Controller
OCP8110	500mA Buck/Boost Charge Pump LED Driver
OCP8110A	500mA Buck/Boost Charge Pump LED Driver
OCP8111	1.0A Buck/Boost Charge Pump LED Driver
OCP8111A	1.0A Buck/Boost Charge Pump LED Driver
OCP8113	1.3A Buck/Boost Charge Pump LED Driver
OCP8121	One-Channel High Power LED Controller
OCP8122	Dual-Channel high Power LED Controller
OCP8122A	Dual-Channel high Power LED Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

WWW.ORIENT-CHIP.COM OCP8108A One-Channel High Power LED Controller ◼ General Description The OCP8108A is a high power LED driver, non-synchronous boost controller. Ideal for use, the OCP8108A can powered the LED backlight in LCD panels. It contains all of the features needed to implement single ended primary topologies. The OCP8108A is suitable for topologies which require a ground source N-channel FET including boost, SEPIC and various LED driver applications. The device features include programmable oscillator frequency, power MOSFET over-current protection (OCP), over-voltage protection (OVP), under-voltage lock-out (UVLO) and Over Temperature protection (OTP). A soft-start feature is provided to minimize in-rush current during start-up.