Datasheet4U Logo Datasheet4U.com

STK672-630C-E - 2-phase Stepping Motor Driver

Features

  • Built-in opened motor pin detection function (output current OFF).
  • Built-in overcurrent detection function (output current OFF).
  • Built-in overheat detection function (output current OFF).
  • If opened motor pin, over-current, or overheat detection function is activated, the FAULT1 signal (active low) is output. The FAULT2 signal is used to output the result of activation of protection circuit detection at 3 levels.
  • Built-in power on reset function.

📥 Download Datasheet

Datasheet Details

Part number STK672-630C-E
Manufacturer onsemi
File Size 233.94 KB
Description 2-phase Stepping Motor Driver
Datasheet download datasheet STK672-630C-E Datasheet

📁 Similar Datasheet

  • STK672-630A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-632A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-640A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-642A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
  • STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
  • STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
  • STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
  • STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-060 - Thick-Film Hybrid IC (Sanyo Semicon Device)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA2115 STK672-630C-E Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-630C-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in opened motor pin detection function (output current OFF). • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If opened motor pin, over-current, or overheat detection function is activated, the FAULT1 signal (active low) is output. The FAULT2 signal is used to output the result of activation of protection circuit detection at 3 levels. • Built-in power on reset function.
Published: |